Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Pass this manual on to whoever might acquire the appliance at a future date. - 1 CURLER SET KH 1804 Intended use This appliance is intended for human hair care and only for use in domestic households. It is not intended for use on animals or in commercial or industrial environments. Technical data Voltage : 230-240 V~, 50 Hz Power consumption : 600 W Protection class: II Items supplied Curler Set Operating instructions Appliance description q Accessories slot w Unlocking device e Step switch r Air intake grill t Suspension eye y Power cable u Warm-air round brush i Volume attachment o Brush attachment Safety information To avoid potentially fatal injury through electric shock: • Never touch the appliance or the power plug with wet or moist hands for as long as the power plug is in the wall socket • Never use the appliance near water, particularly not near sinks, baths or other vessels. . • Ensure that the power cable never becomes wet or damp during operation. Lay the cable such that it does not get clamped or otherwise damaged. • Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department. • Alway remove the plug from the power socket after use, particularly if you use the appliance in the bathroom. It is not sufficient to simply switch off the appliance – voltage is present in the appliance for as long as the plug is connected to the power socket. • Make sure that no objects can penetrate to the inside of the appliance, particularly not metal hair clips, grips or hairpins. Tip: An RCD on the bathroom circuit provides additional protection. For more information, please consult an electrican. - 2 To avoid burns and other injuries: • The appliance and its accessories can become hot when in use. Therefore only touch the handle and the buttons. • Always use the appliance with attachments only, never on its own, as the connector for the accessories becomes hot during operation. • Allow the appliance to cool down before attaching or detaching accessories. • Only use the enclosed original accessories, as they have been optimized to work with this appliance. Other parts are possibly not adequately safe. • Keep air inlet and outlet openings clear for an unimpaired air flow. Otherwise, the appliance may overheat. • Be careful with hair spray, water atomizers etc. On the one hand, the air flow may blow these substances directly into your eyes.On the other hand, these substances must not enter the appliance – they may be inflammable, agressive or conductive for electricity. • This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. • Children should be supervised to ensure that they do not play with the appliance.. Commissioning Before starting the appliance up, make certain that ... – the appliance and the accessories are in good working order, – all packaging material has been removed. If necessary, clean the accessories as described under “Cleaning and Care”. Attaching/detaching accessories Caution: After operation, the appliance components may be hot! To attach an accessory ... • place it over the accessories slot q then press it firmly on, until it engages and sits securely. To detach an accessory ... • switch off the appliance first and allow it to cool down • withdraw the accessory - 3 Switching on/off / Selecting a heat level When you have attached the required accessory and inserted the plug into the power socket, you can switch the appliance on with the step switch e and select the output level: „0“ The appliance is switched off „C“ for a cold air-flow „1“ for a reduced air-flow strength with heat „2“ for a high air-flow strength with heat You switch the appliance off by sliding the step switch e to the position "0" (= appliance off). Using the attachments Warm-air round brush The warm-air round brush u is intended for the styling of thicker strands or waves. 1. Attach the warm-air round brush u onto the appliance as described in the chapter “Attaching/ detaching accessories”. 2. Slide the step switch e onto the desired setting. 3. Take hair strands with a maximum width of 5 cm (ca. 2 in) and wrap them from the ends to the roots around the warm-air round brush u. 4. When the strands of hair are dry, press the release button w and guide the warm-air round brush u slowly back through the hair. As the warm-air round brush u can turn itself because of the pressing of the release button w, it is possible to draw it from the hair without the styling being stressed. 5. Comb the hair through when it has cooled down. Brush attachment The brush attachment o is suitable for styling pony-tails or thin strands. 1. Attach the brush attachment oonto the appliance as described in th...