EdgeStar Portable Air Conditioner 12 Fan Only mode is used to circulate the air in your room. No temperature setting is needed. To operate the unit in Fan Only mode: 1) Make sure the power cord is plugged into a power outlet. 2) Press the Power button. 3) Press the Mode button until the LED indicator next to “Fan Only” lights up. 4) Press the Speed button to select the fan speed. You can choose between High, Medium and Low. The LED indicator next to the speed will light up. The Speed button is u

This portable air conditioner is not intended for use by children. Children should be supervised to ensure that they do not play with this product. Your portable air conditioner is supplied with a Leakage-Current Detection and Interruption (LCDI) safety plug. This device provides protection to reduce the risk of fire due to arcing faults in the power supply cord. Before using your portable air conditioner, follow the instructions below to ensure that the LCDI plug is working properly: 1. Plug th

Connecting the duct connector to the unit Connecting the duct connector to the grated adapter 7. Align the slots on the duct connector to the tabs and snap into the back of the unit. 8. Align the slots on the duct connector to the tabs on the grated adapter and snap in place. . .. 9 Your portable air conditioner is designed to exhaust condensate water that is collected from the air. This water, in either gaseous or droplet form, will be expelled out the exhaust port of the unit. Please take this

.. .. EdgeStar Portable Air Conditioner 8 After you have installed the exhaust hose and window kit, you can plug in your portable air conditioner and start using it. Connecting the duct connectors to the unit Connecting the duct connector to the grated adapter 7. Align the slots on the duct connector to the tabs and snap into the back of the unit. 8. Align the slots on the duct connector to the tabs on the grated adapter and snap in place. . .. 9 Your portable air conditioner is designed to exha

Please read it carefully and save it for reference. Safety Instructions Improper handling can cause serious damage to the appliance and/or to the user. This portable air conditioner is not intended for use by children. Children should be supervised to ensure that they do not play with this product. Electrical Safety 1. This unit is designed for indoor use only. 2. Do not use the unit in extremely humid or wet environments. 4. Do not pull the unit by the cord. 3. Do not wet the housing or control

Working range for heating function is 41 to 81oF. For temperature outside this range. the unit may not work properly. 11 12 Operation – Using the Remote Control Operation – Adjusting the Louvers Regulating air flow direction FIG.14 Move the roller on the air vent to the left or right to control the air flow direction. NOTICE ! 1. To prolong the compressor's life, please wait at least 3 minutes before turning the unit back on after shutting it off. 2. The cooling system will shut off if the ambie

We would like you to be able to fully utilize all features of this portable air conditioner, so please take the time to read this owner’s manual in full prior to using the unit. Energy saving tips: 1. Use the portable air conditioner for the recommended room size. Rooms that are too small can cause the unit to short cycle and work inefficiently. Rooms that are too large will never cool completely. 2. Be careful not to obstruct the air flow coming out of the portable air conditioner. A powerful,

5. Move the portable air conditioner into place near the wall and insert the exhaust hose into the round adapter. Twist the exhaust hose into the adapter in a clockwise direction. 6. When not in use, remove the exhaust hose from the round adapter and place the round adapter cap over the hole. Notes: 1. The exhaust hose supplied with the portable air conditioner can be extended from 14 1/2” to 59”. However, the shorter the hose, the more efficient the unit will perform. 2. Try to prevent any kink

The set temperature will be displayed for 15 seconds, then revert back to room temperature. The temperature is only adjustable in cooling mode. The time is adjustable between 1-12 hours. Note: By pressing both of the Timer/Temp button the same time, the display will toggle between Celsius and Fahrenheit. Note: The displayed range of the ambient temperature in both celsius and farenheit is from 0° to 99°. Any temperature above 99° will be displayed as “HI” on the indicator, and any temperature