Оценок - 1, средний балл: 1
(
)
)
|
К этому устройству также есть другие инструкции:
Кондиционеры - S09LHQ (1.98 mb)
Кондиционеры - S09LHQ (1.95 mb)
Кондиционеры - S09LHQ (1.95 mb)
Фрагмент инструкции
18. HEATER BUTTON(OPTIONAL) (Not available in all models) 19. LCD/LED LUMINOSITY BUTTON(OPTIONAL) Used to adjust LCD/LED luminosity. To use the functions printed in blue at the bottom of the buttons press 2nd F button first and then the required function button. Pressing the 2nd F button activates the blue printed function of the respective button. To cancel the function press the 2nd F button again else it will automatically cancel if remains idle after 10 seconds. 10 Room Air Conditioner Owner's Manual 11 ON Cooling Healthy Dehumidification Auto Changeover Heating (Heat pump model only) To lower the temperature To raise the temperature 1 2 3 4 CHAOS Air Fan speed is on low. Fan speed is on medium. Fan speed is on high. Operating Instructions Press the START/STOP BUTTON to turn the unit on. The unit will respond with a beep. Open the door of the remote controller and press the operation mode button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. Auto Operation (Cooling Only Model) Auto Changeover (Heat Pump Model) For cooling or heating operation set the desired indoor temperature by pressing the ROOM TEMPERATURE SETTING BUTTONS. For cooling the temperature can be set within 18°C~30°C and for heating the temperature range is 16°C~30°C. Set the fan speed with the remote controller. You can select the fan speed in four steps-low, medium, high and CHAOS by pressing the INDOOR FAN SPEED SELECTOR BUTTON. Each time the button is pressed, the fan speed mode is shifted. 1 2 3 4 Natural wind by the CHAOS logic o For fresher feeling, press the INDOOR FAN SPEED SELECTOR BUTTON selector and set to CHAOS mode. In this mode, the wind blows like a natural breeze by automatically changing fan speed according to the CHAOS logic. Operation Mode ENGLISH Operating Instructions During Healthy Dehumidification Operation oIf you select the dehumidification mode on the OPERATION MODE SELECTION BUTTON, the product starts to run the dehumidification function. It automatically sets the room temperature and airflow volume to Healthy Dehumidification Operation Healthy* Dehumidification the best condition for dehumidification, based on the sensed current room temperature. In this case, however, the setting temperature is not displayed on the remote controller and you are not able to control the room temperature either. oDuring the healthy dehumidification function, the airflow volume is automatically set according to the optimization algorithm responding to the current room temperature status, so that the room condition is kept healthy and comfortable even in the very humid season. To run the healthy dehumidification mode follow steps 1, and 2 and 4 (See operation mode) Auto Operation (Cooling Only Model) Auto In this operation mode the actual setting temperature and the fan speed are automatically set by the electronic control logic based on the current roo...