Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Press the Chaos Swing damage the air conditioner. button again to set the horizontal louver at the o When the unit is shut off, the up/down airflow desired airflow direction. direction louver will close the air outlet vent of the system. To adjust left/right(Horizontal Airflow) direction Caution : Ensure that the unit is turned off before adjusting the horizontal airflow direction control. Carefully open vertical louver to allow access to the horizontal airflow direction. Adjust the left/right airflow direction by hand. Whenever you press the Auto Clean button, Auto Clean Function will be reserved and cancelled. Auto Clean function works before and after cooling or dehumidification mode. For details, refer to the below points. When the unit is started after the reservation of Auto Clean ,the Cool Start function operates and indoor Fan is started after 20 seconds. When you press Start/Stop button to turn off the unit after the you have reserved Auto Clean function, the air-conditioner circulates the indoor air in the Auto Clean mode with no more Cooling or Dehumidification operation. For Cooling only model, it lasts for 30 minutes for Heat pump model, for 16 minutes. If you press the auto clean button again during the product operation, Auto Clean function will be cancelled. For this operation C0 appears on the display. (Plasma model only) 12 AUTO CLEAN 12345Auto-Clean (Optional) The left/right(Horizontal Airflow) can be adjusted by using the remote control. Press the Start/Stop button to start the unit. Open the door on the remote control. Press the Airflow Direction Start/Stop button and the louvers will swing left and right. Press the Horizontal Airflow Direction Control Button again to set the vertical louver at the desired airflow direction. o Thisfunctionistoremoveunpleasantsmellsfrommoldandotherbacteriaintheair-conditioner,andtoremovehumidityautomaticallyduringhumidlysummer,whichsuppliestheindoorwithpurifiedair. NOTICE Horizontal Airflow Direction Control (Optional) 18 Room Air Conditioner Operating Instructions Air Circulation Mode 21 Circulates the room air without cooling or heating. Press the Start/Stop button. the unit will respond with a beep. Open the door on the remote control. Press the Air Circulation button. Close the door on the remote control. Now each time that you press the Indoor Fan Speed Selector, the fan speed is shifted from low to CHAOS and back to low again. Fan speed is on low. Fan speed is on medium. Fan speed is on high.CHAOS Air NOTICE o CHAOS Air economizes power consumption and prevents overcooling. The fan speed is automatically changed from high to low or vice versa, depending on the ambient temperature. Forced Operation Operation procedures when the remote control can't be used. The operation will be started if the power button is pressed. If you want to stop operation, re-press the button. Open the frontpanel upward Power button Cooling Model Heat pump Model Room Temp. . 24°C 21°C . Room Temp. < 24°C Room T emp. < 21°C Operating mode Cooling Cooling Healthy Dehumidification Heating Indoor FAN Speed High High High High Setting T emperature 22°C 22°C 23°C 24°C Test operation During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room temperature and resets in 18 minutes. During test operation, if remote controller signal is received, the unit operates as remote controller sets. If you want to use this operation, open the front panel upward and Press the power button let it be pressed for about 3 seconds. If you want to stop the operation, re-press the button. For this operation L0 appears on the display. (Plasma model only) Auto restart In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate procedures automatically to the previous operating conditions. So there is no need of activating this function by pressing any key or button. In the initial mode, the fan operates at a low speed and the compressor starts 2.5~3 minutes later. As the compressor starts, the fan speed also resumes its previous setting mode. Additionally, in order to cancel auto restart operation press power button let it be pressed for about 6 seconds. To operate auto restart operation again, press power button for about 6 seconds as well. Helpful information Fan speed and cooling capacity. The cooling capacity indicated in the specification is the value when the fan speed is set to high, and the capacity will be lower at low or medium fan speed. High fan speed is recommended when you wish to cool the room quickly. HighSpeed Owner’s Manual 19 Maintenance and Service Maintenance and Service CAUTION: Before performing any maintenance, turn off the main power to the system. Indoor Unit Grille, Case, and Remote Control o Turn the system off before cleaning. To clean, wipe with a soft, dry cloth. Do not use bleach or abrasives. NOTICE Supply power must be disconnected before cleaning the indoor unit. Air filters (behind...
Эта инструкция также подходит к моделям:Кондиционеры - KSNH2465JM2.AMBBUKR (1.09 mb)
Кондиционеры - KSUH1865JM3.AMBBUKR (1.09 mb)
Кондиционеры - KSUH2465JM2.AMBBUKR (1.09 mb)