Оценок - 0, средний балл: 0
(
)
)
|
Фото и характеристики LG CS12AQ2 |
Фрагмент инструкции
Select Auto Clean Operation by the function setting button( ) . Now whenever the unit is turned off, the indoor fan is still running for about 30 minutes internally without cooling or dehumidification operation. This function dries up any remains of moisture & cleans the unit internally. If you push the Auto Clean button again, this function is cancelled. NOTE . During Auto Clean fuction, only ON/OFF button, Plasma button, Auto Clean button is used. During this operation, 'Cooling' lamp lights up. PLASMA Purification Operation(Optional) Plasma purification operation can be started by pressing the PLASMA BUTTON on the remote controller. Repressing it will deactivate the operation. • This features can be used in any operation mode and fan speed by pressing the plasma button. • Separate plasma purification operation is possible in stop condition. It is cancelled by pressing plasma button or on/off button. NOTE PLASMA Plasma filter is a technology developed by LG to get rid of microscopic contaminants in the intake air by generating a plasma of high charge electrons. This plasma kills and destroys the contaminants completely to provide clean and hygienic air. ENGLISH Owner's Manual 13 Operating Instructions Energy-Saving Cooling Mode (Optional) Energy-saving cooling mode can save energy in cooling operation, because it can operate efficiently by setting body-adaptation time according to the change of time and temperature and adjusting desired temperature automatically. 1. Press the ON/OFF BUTTON to start the unit. 2. Open the cover of the remote controller. Select cooling operation. 3. Press the ENERGY-SAVING COOLING MODE BUTTON. 4. To cancel the energy-saving cooling mode, press the ENERGY-SAVING COOLING MODE BUTTON again and unit will operate in previous mode(Cooling mode). Display Luminosity (Optional) The unit display Luminosity can be adjusted by using the remote controller. Open the cover of the remote controller and press the LED LUMINOSITY button. Display LED will be dark. Press the button again to set bright display. (The order of 100% . 50% LUMINOSITY is repeated whenever you press the button.) Press the TIMER BUTTON For 3 seconds. Press the TIMER SETTING BUTTONS until the desired time is set. - The order of a.m. and p.m. -> hour ->minute is repeated whenever you press the < > button. - By pressing the button, you can set the current time. Check the indicator for a.m. and p.m.NOTE Setting the Current Time 2 Press the SET/CLEAR button.3 1 14 Air Conditioner Operating Instructions Timer Setting Description Button on the Remote Controller Indication on the LCD Display 1 Press the Timer button once to set on the Reserved 'On' (Press the Timer button twice to set the Reserved 'Off') 2 Press the Time Setting buttons until the desired time is set. - The order of a.m. and p.m. -> hour ->minute is repeated whenever you press the < > button. - By pressing the button, you can set the desired time. 3 Press the SET/CLEAR BUTTON (Press the SET/CLEAR BUTTON once more to cancel) To cancel the timer setting Sleep Mode Operation • If you wish to cancel all timer setting, press the SET/CLEAR button. • In order to cancel the timer settings individually, press the Timer button to select Reserved 'On' or Reserved 'Off'. And then press the Set/Clear button aiming the remote controller at the signal receiver. (the timer lamp on the display will go off) Press the SLEEP MODE AUTO BUTTON to set the time when you want the unit to stop automatically. The timer is programmed in one-hour increments by pressing the SLEEP MODE AUTO BUTTON 1 to 7 times. The sleep mode is available for 1 to 7 hours. NOTE • The sleep mode will operate indoor fan at super low speed in cooling mode and at low speed in heating mode for pleasant sleep. In cooling mode or healthy dehumidification mode: The setting temperature will rise automatically two times by 1°C over next consecutive 30 minutes (Maximum 2°C) for a comfortable sleep. This will be the final setting temperature as long as sleep mode is functioning. ENGLISH Owner's Manual 15 Operating Instructions The Horizontal Vane can be adjusted by using the remote controller. 1. Press the ON/OFF BUTTON to start the unit. 2. Press the vertical airflow direction button. Each time the button is pressed, the air-flow direction is changed in the direction of the arrow. The Vertical Louvers can be adjusted by using the remote controller. 1. Press the ON/OFF BUTTON to start the unit. 2. Press the horizontal airflow direction button. Each time the button is pressed, the airflow direction is changed in the direction of the arrow. STOP 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step Auto Swing Horizontal Vane Control Vertical Louver Control (Optional) .Press the Vertical Airflow Direction button once more during Auto Swing at the direction of airflow you want. .Press the Horizontal Airflow Direction button once more during Full Auto Swing at the direction of airflow you want. 1 Step 2 Step 3 Step 4 Step 5 Step Left Aut...
Эта инструкция также подходит к моделям:Кондиционеры - S09AQ (2.99 mb)
Кондиционеры - S09AQU2 (2.99 mb)
Кондиционеры - S12AQ (2.99 mb)