Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
3. Press the ENERGY-SAVING COOLING MODE BUTTON. 4. To cancel the energy-saving cooling mode, press the ENERGY-SAVING COOLING MODE BUTTON again and unit will operate in previous mode(Cooling or healty dehumidification mode). Display Luminosity (Optional) The Display Luminosity can be adjusted by using the remote control. Open the door of the remote controller, and press the LCD LUMINOSITY button. Display will be dark. Press the button again to set bright display. Forced operation Operation procedures when the remote control can't be used. The operation will be started if the ON/OFF button is pressed. If you want to stop operation, re-press the button. ON/OFF button Cooling Model Heat pump Model Room Temp. . 24°C 21°C . Room Temp. < 24°C Room Temp. < 21°C Operating mode Cooling Cooling Healthy Dehumidification Heating Indoor FAN Speed High High High High Setting Temperature 22°C 22°C 23°C 24°C Test operation During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room temperature and resets in 18 minutes. During test operation, if remote controller signal is received, the unit operates as remote controller sets. If you want to use this operation, Press and hold the ON/OFF button for 3~5 seconds, then the buzzer sound 1 "beep". If you want to stop the operation, re-press the button. 14 Room Air Conditioner Operating Instructions 1. Press the TIMER BUTTON for 3 seconds. 2. Press TIME SETTING BUTTONS until the desired time is set. 3. Press the SET / CLEAR BUTTON. NOTE Setting the Current Time Check the indicator for A.M. and P.M. 1. Press the TIMER BUTTON to turn timer on or off. 2. Press TIME SETTING BUTTONS until the desired time is set. 3. Press the SET / CLEAR BUTTON. Select one of the following 2 types of operation.NOTE Timer Setting Timer On Timer Off Press the SLEEP MODE AUTO BUTTON to set the time when you want the unit to stop automatically. The timer is programmed in one-hour increments by pressing the SLEEP MODE AUTO BUTTON 1 to 7 times. The sleep mode is available for 1 to 7 times. NOTE • If you wish to cancel all timer setting, press the CLEAR ALL BUTTON. • If you wish to cancel each timer setting, press the TIMER BUTTON to turn timer sleep on or off as you want. And then press the SET/CLEAR BUTTON aiming the remote controller at the signal receptor. (The timer lamp on the air conditioner and the display will go off.) To cancel the timer setting Sleep Mode • The sleep mode will operate indoor fan at slow speed in cooling mode and at medium speed in heating mode for pleasant sleep. • Art Cool and Art Cool Wide (non-Deluxe) close the lower discharge partially in sleep mode for pleasant sleep. In cooling mode or healthy dehumidification mode: The setting temperature will rise automatically two times by 1°C over next consecutive 30 minutes (2°C in 1 hour) for a comfortable sleep. Now this will be the final setting temperature as long as sleep mode is functioning. ENGLISH Owner's Manual 15 16 Room Air Conditioner The up/down airflow (Vertical airflow) can be adjusted by using the remote controller. 1. Press the ON/OFF BUTTON to start the unit. 2. Press CHAOS SWING BUTTON. 3. The louvers will swing up & down automatically. 4. To stop the louver at a desired angle, press again The left/right(Horizontal airflow) can be adjusted by using the remote control. 1. Press the ON/OFF BUTTON to start the unit. 2. Press the HORIZONTAL AIRFLOW DIRECTION BUTTON. 3. The louvers will swing left & right automatically. 4. To stop the louvers at a desired angle, press again. Operating Instructions Vertical / Horizontal Airflow Direction Control (Optional) • By pressing the CHAOS SWING BUTTON the horizontal air flow direction is changed automatically based on the chaos algorithm to distribute the air in the room evenly and at the same time to make the human body feel most comfortable as if enjoying natural breeze. • Manually moving the vertical air flow direction louver by hand could damage the mechanism.When the unit is shut off, the up/down airflow direction louver will close the air outlet vent of the system. • The Chaos Swing may not run correctly during sleep mode. NOTE This feature is enabled by factory default setting, but you can disable it by pressing the ON/OFF button for 6 seconds. The unit will beep twice and the indicator lamp(2) will blink 4 times. To enable it, press the button again for 6 seconds. The unit will beep twice and the indicator lamp(1) will blink 4 times. NOTE This function is useful in the situation of power failure. When power regains after a failure this feature restore the previous operating condition and the air conditioner will run in the same settings. Auto Restart Function Owner's Manual 17 ENGLISH Maintenance and Service Indoor Unit Before performing any maintenance, turn off the main power to the system, disconnect the circuit breaker and unplug the power cord. Clean the unit with a soft dry cloth. Do not use bleach or abrasives. Never use any of the...
Эта инструкция также подходит к моделям:Кондиционеры - LSUH096PUL7 (1.94 mb)