Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
The appliance stops working when this happens. The symbol also appears and the appliance beeps when the removable tank is not properly fitted into its housing. • In both events, it is necessary to extract the tank and pour the water carefully down the nearest drain. Dehumidification in continuous mode: • Place a receptacle at the end of the water drainage pipe to collect the condensed water or lead the pipe to the nearest drain. • Remove the plug from the water drainage pipe on the back at the bottom of the unit. The appliance does not stop working in this mode. It does not beep or display the symbol when the external receptacle is full. (see "Selecting the operation function"). • Select the operation speed, (see "Selecting the speed"). Warnings The amount of water dehumidified may vary depending on ambient conditions (See “ Technical Information”). When the appliance is operating in the dehumidification function, the temperature does not appear on the screen and cannot be selected or modified. Warning! Do not forget to replace the plug onto the water drainage pipe when you change function, otherwise the appliance will shed water when operated. Remember that ambient temperature must be 18.C or higher in order for the appliance to work. The appliance expels hot air through the drainage pipe when operating in dehumidification function. This is necessary for the appliance to work more efficiently in this operation function. causing a slight rise in room temperature Air purification The air inside the room (ventilation) is circulated through a purifying system (air purification) when the appliance is set to this function. The appliance comes with a basic filter (already fitted on the appliance) and a double active filter to be fitted by the user, see “Fitting the purifying filter (double active)”, against: - Smells and smoke. - Pollen, bacteria and dust. • Plug the appliance into the mains electricity supply. • Fit the hot air expulsion tube (see “Preparing the appliance before use”). • Lift the air director on the top of the appliance. 58 Instructions for Use • Select the air purification function , (see "Selecting the operation function"). • Select the operation speed, (see "Selecting the speed"). Important We recommend you leave the filters in position regardless of the function setting (air conditioning, dehumidification, air purification) in order to purify the air more effectively. Selecting the temperature This function is only available in the cooling function. Place the selection box on the temperature selection menu (see "Up" and "down" keys). Use the "+" and "–" keys to move within the selection box until the desired temperature is reached (see "+" and "–" keys). The "+" key increases the desired temperature and the "–" key reduces the desired temperature. The temperature selectable ranges from 18°C to 30°C and can be set to the nearest 1°C. Keep the key pressed in to increase or decrease the desired temperature more quickly. Selecting the speed There are three manual speeds (maximum medium and silent and one automatic speed aut available on your appliance. The automatic speed setting works in maximum or silent mode depending on room conditions and the temperature set by the user. Manual speeds: Place the selection box on the speed selection menu (see "up" and "down" keys). Use the "+" and "–" keys to move within the menu to set the desired speed (see "+" and "–" keys). The manual symbol appears on the screen followed by the last speed set. Press the “+ / –” keys to change the speed between maximum medium and silent . Automatic speed Press the auto key on the control panel to activate this speed. The manual symbol disappears and the auto symbol is displayed on the screen. Press the auto key again to deactivate automatic speed. The auto symbol disappears and the appliance returns to the manual speed previously set. Side fins Your appliance is fitted with side fins which can be activated to distribute the air more efficiently. Press the side fin key to open the fins and activate their operation. The relevant symbol is displayed on the screen. Press the same key again to close the fins. The symbol disappears from the screen and the fins close. 59 Instructions for Use These fins are available in all operation functions: cooling, dehumidification and air purification. The side fins close automatically when the appliance is turned off via the "Off" keyIf the side fins were open prior to turning the appliance off, they open again when the appliance is turned back on. . Setting the clock / Programming the timer Setting the clock • The current time (24-hour clock) is displayed in the top left-hand corner of the screen the first time the appliance is connected to the mains electricity supply. 0:00 flashes by default. • To set the time, it is necessary to turn the appliance on by pressing the "On" key . If you take more than 10 seconds to perform the next operation during programming / setting the clock on your...
Эта инструкция также подходит к моделям:Кондиционеры - 3XM440H/02 (5.23 mb)