Производитель: Samsung Размер: 4.73 mb Название файла: Язык инструкции:

Перейти к скачиванию

Air intake Air filter(under the panel) Air flow blade Power button Blade pin lever Air flow blade Operation indicator Timer indicator Turbo indicator REMOVING THE FRONT PANEL Tightly grab both side of the front panel and lift up the panel to open. Then slide the panel towards to remove the panel. Power button and Room temperature sensor You may locate the Power button on the right bottom side of the air conditioner. If the front panel is open, you can check the room temperature sensor. You can turn on the air conditioner without the remote control by pressing the Power button. The room temperature sensor measures indoor room temperature. Room temperature sensor Power button viewing your air conditioner • Point the remote controller towards the remote controller receiver of the indoor unit. • When you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit indicator() appears on the remote controller display. REMOTE CONTROLLER BUTTONS Carefully unpack your air conditioner, and check the unit to make sure it is not damaged. Remote controller display Mode Select one of the 5 operation modes. Power Turn the air conditioner on/off. Quiet Reduce noise generated from an indoor unit during operation. S-Plasma ion Has no this function This button does not have a function. Air swing Activate/Deactivate air flow blade movement automatically up and down. (not applicable to Duct type model) Turbo Cool or heat your room quickly and powerfully. Fan .. Adjust amount of air flowing through the air conditioner with the 4 different fan speeds such as Auto/Low/Medium/High. Temp +- Increase/Decrease the temperature by 1.C. Filter reset (Hold down this button for 3 seconds.) Has no this function Blade Has no this function Air swing Has no this function Beep off Has no this function Room Has no this function Set the mode on. Set/Cancel Set or Cancel the on/off timer, mode. On Timer Set the On Timer on. Off Timer Set the Off Timer on. 2ndF Has no this function REMOTE CONTROLLER INDICATORS Operation mode indicator Transmission indicator Heat mode* is applicable . 2ndF indicator Low battery indicator Set temperature & On/ Off set time indicator Air swing indicator Fan speed indicator Auto (Turbo) Low Medium High On/Off timer indicator Room & Blade selection indicator Battery changing time When the battery is exhausted, () will be displayed in the remote controller display. When the icon appears, change the batteries. The remote controller requires two 1.5V AAA type batteries. Storing the remote controller When you do not use the remote controller for long time, remove the batteries from the remote controller and store it. Inserting the batteries 1. Push the lever as arrow indicates on the rear side of the remote controller and pull up. 2. Insert two AAA batteries. Check and match the “+” and “-” signs accordingly. Make sure you have inserted the batteries in correct position. 3. Close the cover by place it back to its original position. You should hear click sound when the cover is locked properly. • Make sure that water is not allowed to enter the remote controller. CAUTION • There is a possibility that the air conditioner will not operate by remote controller near strong light such as a fluorescent lamp or neon sign. In this case, use the remote controller in front of the remote controller receiver of the indoor unit. • If other electrical products are operated by the remote controller, call your nearest service center. • To silence the beep sound, press the Beep off button. When you press the Beep off button again, the beep sound will ring again. NOTE Correct Disposal of Batteries in This product (Applicable in countries with separate collection systems) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. Operating basic function SELECTING OPERATION MODE Basic operation is an operation mode that can be selected by pressing the Mode button. Auto In Auto mode, the air conditioner will automatically set the temperature and fan speed to maintain your fresh environment. • When the indoor temperature is too high, the powerful cool breeze is generated and when the indoor becomes cool enough, the soft breeze is generated. Cool Cool mode is frequently used and you can freely control the temperature, fan speed, and air flow direction in cool mode. • Wh...

Эта инструкция также подходит к моделям:
Кондиционеры - AM022FNTDEH/EU (4.73 mb)
Кондиционеры - AM028FNQDEH/EU (4.73 mb)
Кондиционеры - AM028FNQDEH/TK (4.73 mb)
Кондиционеры - AM028FNTDEH/EU (4.73 mb)

Скачать инструкцию

Чтобы скачать, введите 2 цифры: