Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
The time increases or screen the first time the appliance is decreases by one minute each time one of connected to the mains electricity supply. these keys is pressed. Keep the key 0:00 flashes by default. pressed in to increase or decrease the o To set the time, it is necessary to turn the minutes more quickly. appliance on by pressing the "On" key . If you take more than 10 seconds to perform the next operation during programming / setting the clock on your appliance, the screen automatically returns to the main menu and the factory-set default settings are displayed or, if this is not the first time that the timer is set, the last settings used are displayed on the screen. o Press the "Ti m e r" key , to memorise the time. If you do not press this key, the time is automatically memorised when a period of 10 seconds has passed without pressing any key. The screen returns to the main menu. o Press the "Timer" key . The selection box appears on the timer menu with the last function selected ("Off" is displayed by default). 10 sec/ 40 Instructions for Use Programming the timer The appliance needs to be turned on with the clock set in order to programme the start / stop times. Press the "Timer" key , to navigate through the timer menu. Press the "+" key to programme the different functions available on your appliance. These are: • "Off" : appliance not programmed. • "Start" : programming the appliance start time. • "Start" / "Stop" : programming the appliance start and stop time. • "Stop" : programming the appliance . Programming the appliance start time o Press the "Ti m e r" key , to position the cursor on the timer menu. The last function programmed appears by default. o Use the "+" and "–" keys to select the "Start" function , (see "+" and "–" keys). o Use the "down" key (see "up" and "down" keys) to lower the cursor to the start time menu. Then use the "+" and "–" keys to modify the programmed time until the desired time is reached. o The time changes 15 minutes at a time. o Press the "Timer" key , or wait for 10 seconds without touching any keys to memorise the set start time. o The set time is displayed on the screen together with the relevant symbol (the "Start" symbol ) and the set functions. Programming the appliance "Start" / "Stop" timer o Press the "Ti m e r" key , to position the cursor on the timer menu. The last function programmed appears by default. 10 sec/ 41 Instructions for Use o Use the "+" and "–" keys to select the "Start" function , (see "+" and "–" keys). o Use the "down" key (see "Up" and "down" keys) to lower the cursor to the start time menu. Then use the "+" and "–" keys to modify the programmed time until the desired time is reached. o Press the "u p" key again to position the cursor on the timer menu. Use the "+" and "–" keys to select the "S t a r t" / "S t o p" f u n c t i o n . (see "+" and "–" k e y s ) . o Use the "down" key to position the cursor on the stop time menu. Then use the "+" and "–" keys to modify the stop time until the desired time is reached. o The time changes 15 minutes at a time. o Press the "Timer" key , or wait for 10 seconds without touching any keys to memorise the set start / stop times. o The set time is displayed on the screen. 10 sec/ Programming the appliance stop time o Press the "Timer" key , to position the cursor on the timer menu. The last function programmed appears by default. 42 Instructions for Use o Use the "down" key (see "up" and "down" keys) to lower the cursor to the stop time menu. Then use the "+" and "–" keys to modify the stop time until the desired time is reached. o The time changes 15 minutes at a time. o Use the "+" and "–" keys to select the Turning the timer off "Stop" function , (see "+" and "–" keys). o Press the "Timer" key , to position the cursor on the timer menu. The last function programmed appears by default. o Press the "Timer" key , or wait for 10 seconds without touching any keys to memorise the set stop time. o The set time is displayed on the screen. 10 sec/ o Use the "+" and "–" keys to select the "Off" function. o Press the "Timer" key , or wait for 10 seconds without touching any keys to turn the timer off. No set time is displayed on the screen. 10 sec/ o The times and functions set on the timer remain active and the programmed operation is repeated every day at the set times until deactivated or cancelled as described above. 43 Fig. 20 A double active filter is also fitted inside the basic filter on these models, Fig. 21. In order to remain operational, this filter needs to be changed every year or when the "change filter" symbol appears on the screen. (These accessories are available for purchase from the Manufacturer's Official Technical Service and authorised distributors). Press the "+" and the "–" key at the same time to make the symbol disappear from the screen after changing the filter. The symbol disappears from the screen and the filter is operational again. Installing the double active filter: ...