Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Кондиционеры - MH020FNEA (61.85 kb)
Кондиционеры - MH020FNEA (3.6 mb)
Фрагмент инструкции
You can set the temperature between 16°C and 30°C. Result: . Each time you press the button: - The temperature adjusts by 1°C - The indoor unit beeps . The air conditioner starts dehumidifying and the fan speed adjusts automatically. 4 To control the airflow direction, refer to page 21. FJM_Neo_FORTE_Inv_28925A_IB_E.indd 16 2007-12-11 10:52:53 E-17 ENGLISH Selecting Fan Mode Select Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button on the remote control until is displayed. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in Fan mode. . The temperature is set automatically. Note You can change modes at any time. 3 Press the button to select the fan speed until the required setting is displayed. Low Medium High Result: Each time you press the button, the indoor unit beeps. 4 To control the airflow direction, refer to page 21. FJM_Neo_FORTE_Inv_28925A_IB_E.indd 17 2007-12-11 10:52:56 E-18 Selecting Good Sleep Mode Good Sleep mode helps users to fall asleep well after going to bed whether being too hot to sleep or being awakened by coldness. The Good Sleep mode can be selected only when the air conditioner is switched on in cool/heat mode. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button to select or mode. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in cool or heat mode. 3 Press the button. - The remote control display shows you that this mode automatically stops after 8-hour operation. - In the case of adjusting time .... Press the button to adjust desired operation time from 30 minutes to 12 hours. Good Sleep mode will automatically stop after the set time. .... Press the button. Result: In the case of adjusting the extra time for Good Sleep mode,you should press the button within 10 seconds.If you do not press the button within 10 seconds.Good Sleep mode will automatically stop in 8-hour operation. 4 Press the button to adjust the temperature until the desired temperature is displayed. You can set the temperature between 16°C and 30°C. Result: .Each time you press the button; - The temperature adjusts by 1°C - The indoor unit beeps FJM_Neo_FORTE_Inv_28925A_IB_E.indd 18 2007-12-11 10:52:59 E-19 ENGLISH Temperature changes in mode To prevent excessive cooling/heating during sleep, the mode automatically modifies the temperature setting in accordance with the time setting. Temperature and air current change according to the three stages; Falling asleep, Sound sleep, and Waking up from mode, and then the air conditioner will automatically turn off when the set time has elapsed. Three stage prevents you from having difficulty sleeping on extremely hot/cold nights. ..Falling asleep : Eases you into sleep by dropping the temperature. ..Sound sleep : Relaxes your body and raises your temperature slightly. ...Waking up from mode : Allows you to wake up to comfortable crisp air making you feel refreshed and energized. • Set the Off timer in mode for more than 5 hours. Sleep may be disturbed if the mode is set for too short or too long a time because the temperature changes are set to an 8-hour cycle. • If the mode is set for less than 4 hours, the operation will stop at the set time. If the mode is set for over 5 hours, the last hour will run in Waking Up stage before shutting off. • Recommended set temperature is between 25.C~27.C for cooling and 21.C~23.C for heating. Cool mode Heat mode Time(hr.) Set temperature Temp. When the 8-hour cycle completes, this section repeats. Time(hr.) Temp. Set temperature When the 8-hour cycle completes, this section repeats. Temperature changes in mode To prevent excessive cooling/heating during sleep, the mode automatically modifies the temperature setting in accordance with the time setting. Temperature and air current change according to the three stages; Falling asleep, Sound sleep, and Waking up from mode, and then the air conditioner will automatically turn off when the set time has elapsed. Three stage prevents you from having difficulty sleeping on extremely hot/cold nights. ..Falling asleep : Eases you into sleep by dropping the temperature. ..Sound sleep : Relaxes your body and raises your temperature slightly. ...Waking up from mode : Allows you to wake up to comfortable crisp air making you feel refreshed and energized. • Set the Off timer in mode for more than 5 hours. Sleep may be disturbed if the mode is set for too short or too long a time because the temperature changes are set to an 8-hour cycle. • If the mode is set for less than 4 hours, the operation wi...
Эта инструкция также подходит к моделям:Кондиционеры - MH026FNEA (7.85 mb)
Кондиционеры - MH035FNEA (7.85 mb)
Кондиционеры - MH052FNEA (7.85 mb)
Кондиционеры - MH18VF1-09 (7.85 mb)