Оценок - 1, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Кондиционеры - ACH2400E1 (1.91 mb)
Кондиционеры - ACH2400E1 (1.95 mb)
Фрагмент инструкции
Batteries may be completely discharged after 12 months, even if they have not actually been used. You must insert or replace the remote controller batteries when : You purchase the air conditioner The remote controller does not work correctly Notte ENGLISH U UUUUs ssssi iiiin nnnng gggg W WWWWi iiiir rrrre eeeed dddd R RRRRe eeeem mmmmo oooot tttte eeee C CCCCo oooon nnnnt ttttr rrrro ooool lllll lllle eeeer rrrr This chapter indicates how to operate and program your air conditioner with the wired remote controller. The wired remote controller is an optional accessory. E-12 Result: The air conditioner runs in AUTO mode. IM Selecting the Automatic Operating Mode Selecting the Automatic Operating Mode N NNo oot tte ee You can change modes at any time. 3 To adjust the temperature, press the Temperature buttons one or more times until the required temperature is displayed. Possible temperatures are between 18OC and 30OC inclusive. Result: Each time you press Temperature buttons: -The temperature is adjusted by 1OC. The air conditioner takes the present temperature of the room every 30 minutes. -If the temperature is higher than the selected temperature +., the air conditioner will start cooling. -If the temperature is lower than the selected temperature -., the air conditioner will start heating. N NNo oot tte eeThe . is a preset temperature for the most comfortable environment. It can be adjusted by your installation specialist when installing the product. E-13 ENGLISH E-14 Cooling Your Room You must select the COOL mode if you wish to adjust the : Cooling temperature Fan speed when cooling 1 If necessary, press (ON/OFF) button. Result: The On/Off indicator on the wired remote controller comes on. The air conditioner runs in the mode selected when the unit was last used. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: Plugged in Stopped lt will start up normally after three minutes. IMPORTANT To select the COOL mode, press the Mode button until is displayed at the top of the wired remote controller. Result: The air conditioner runs in COOL mode. 2 Notte You can change modes at any time. To adjust the temperature, press the Temperature buttons one or more times until the required temperature is displayed. Possible temperatures are between 18OC and 30OC inclusive. Result: Each time you press Temperature buttons: - The temperature is adjusted by 1OC. The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature ; the fan will, however, operate. 3 Select the fan speed by pressing the Fan button one or more times until the intended value is displayed : Automatic(rotated : . . ) Low Medium High 4 5 To control the direction of the air flow, refer to page 17. E-15 Heating Your Room Automatic(rotated : . . ) Low Medium High You must select the HEAT mode if you wish to adjust the : Heating t...
Эта инструкция также подходит к моделям:Кондиционеры - ACH3600G (1.88 mb)
Кондиционеры - ACH4400G (1.88 mb)
Кондиционеры - CH18ZA (1.88 mb)
Кондиционеры - CH24ZA (1.88 mb)