Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in the Dry mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 18°C and 30°C. Result: . Each time you press the button: - The temperature adjusts by 1°C - The indoor unit beeps . The air conditioner starts dehumidifying and the fan speed adjusts automatically. 4 To control the airflow direction, refer to page 20. E-16 Selecting Fan Mode Select Fan mode if you want to ventilate your room. It helps to refresh the air in your room. You can adjust the fan speed in this mode. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button on the remote control until Fan is displayed. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in Fan mode. . The temperature is set automatically. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required setting is displayed. Low . Medium . High Result: Each time you press the button, the indoor unit beeps. 4 To control the airflow direction, refer to page 20. You can select the Turbo Function if you want to cool or heat your room as quickly as possible. The Turbo function operates for 30 minutes with the maximum settings before returning automatically to the mode and temperature previously selected. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button. Result: . The temperature and fan settings are adjusted automatically. . The air conditioner cools or heats the room as quickly as possible. . After 30 minutes, the air conditioner is reset automatically to the previous setting. . You can select the Turbo function in Auto, Cool and Heat mode. If you select this function in Dry or Fan mode, the mode changes to Auto mode. 3 Press the button again to stop the Turbo Function before the end of the 30-minute period. Result: The air conditioner is reset automatically to the previous setting. 4 To control the airflow direction, refer to page 20. Selecting the Turbo Function E-17 ENGLISH Selecting the Energy Saving Function You can select the Energy Saving Function to save energy when cooling. The temperature range decreases in order to perform this function. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button. Result: . The indoor unit beeps. . The air conditioner runs in the Energy saving function. . The outer airflow blade moves up and down. . The airflow direction indicator is displayed automatically. . To stop the Energy saving function, press the again. Note You can select the Energy saving function only in Cool mode. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 26°C and 30°C. Note If you want to adjust temperature under 26°C, cancel the Energy saving function before adjusting the temperature. 4 Press the to select the fan speed until the required setting is displayed. Auto . Low . Medium . High Result: Each time you press the button, the indoor unit beeps. 5 To control the airflow direction, refer to page 20. E-18 Selecting Mode mode helps users to fall asleep well after going to bed whether being too hot to sleep or being awakened by coldness. The mode can be selected only when the air conditioner is switched on in cool/heat mode. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button to select cool or heat mode. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in cool or heat mode. 3 Press the button. Result: . The timer indicator is displayed. . The Off timer is blinking on the remote control. 4 To set the Off timer, press the buttons once or more times until the required Off time is displayed. Result: . The mode will be automatically stopped in 8 hours if the operation time is not set. . You can set the Off timer by pressing the buttons to turn off the mode automatically at the appointed time within a range of 30 minutes to 12 hours. . Each time the buttons are pressed, the time is increased by 30 minutes or 1 hour. mode will be stopped at the appointed off time. 5 Press the button. Result: The remaining time is displayed. Note In the case of selecting mode or adjusting the extra time for mode, you should press the button within 10 seconds. If you do not press the button within 10 seconds, mode wil...
Эта инструкция также подходит к моделям:Кондиционеры - AQ12MSDX (10.52 mb)