Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
. .Insert two batteries correctly as indicated by the + and – symbols. 1 Remove the battery cover in the rear of the remote control by pushing it with your thumb. 2 Insert two batteries, respecting the polarities as indicated by the + and - symbols. 3 Close the cover by sliding it back in place. 08'FORTE_28591A_IB_E(.A).indd 11 2007-12-7 14:46:59 Getting Started The User’s Manual provides you with valuable information about your air conditioner. In order to take full advantage of the air conditioner’s features, please read this manual carefully before using. You have already seen the basic description of the unit on pages from 8 to 10. Starting with the next page, you will find a series of step-by-step procedures for each function available. The illustrations in the step-by-step procedures use three different symbols: PRESS PUSH HOLD DOWN E-12 08'FORTE_28591A_IB_E(.A).indd 12 2007-12-7 14:46:59 E-13 ENGLISH Selecting Auto Mode You can select Auto mode if you want to cool or heat your room automatically. You can adjust the temperature in this mode. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button on the remote control until is displayed. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in Auto mode. . Auto mode cools or heats the room depending on the set temperature. . The air conditioner changes from Cool or Heat mode automatically, depending on the current temperature. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 16°C and 30°C. Result: . Each time you press the button: - The temperature adjusts by 1°C - The indoor unit beeps 08'FORTE_28591A_IB_E(.A).indd 13 2007-12-7 14:47:01 E-14 Selecting Cool Mode You can select Cool mode if you want to cool your room. You can adjust the temperature and the fan speed when cooling. 1 Press the (On/Off) button. Result: . The operation indicator on the indoor unit lights up. . The air conditioner starts up in the mode you selected last. . The indoor unit beeps. 2 Press the button on the remote control until is displayed. Result: . The indoor unit beeps each time you press the button. . The air conditioner runs in Cool mode. Note You can change modes at any time. 3 Press the button to adjust the temperature until the required temperature is displayed. You can set the temperature between 16°C and 30°C. Result: . Each time you press the button: - The temperature adjusts by 1°C - The indoor unit beeps . If the room temperature is higher than the selected temperature, the air conditioner starts cooling. . If the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan continues to operate. 4 Press the button to select the fan speed until the required setting is displayed. A...
Эта инструкция также подходит к моделям:Кондиционеры - AQ09FA (8.38 mb)
Кондиционеры - AQ09FAN (8.38 mb)
Кондиционеры - AQ09FAX (8.38 mb)
Кондиционеры - AQ09FC (8.38 mb)