Оценок - 5, средний балл: 4 ( )

Производитель: Admiral Размер: 5.16 mb Название файла: Язык инструкции:

In the FAN ONLY Mode, Room Temperature display range is from 0°C (32°F) to 38°C (99°F). Room Temperature below 32°F, the Temperature display L0. Room Temperature above 99°F, the Temperature display H1. If the OFF TIMER is set, the time LED displays the remaining time to turn off the unit for only 12 seconds, then LED shifts to display set temperature. If you press TIMER button within the 12 seconds, OFF TIMER will be cancelled. If the ON TIMER is set, the timer LED displays the remaining time to turn on the unit. If you want to cancel TIMER button. Used to set room temperature in COOLING mode or used to set time in TIMER mode. If the two keys are pressed at the same time, the temperature LED display will alternate between °C and °F. NOTE: Temperature setting range is from 19°C (66°F) to 31°C (88°F). WAC 8-24 USER MAN FINAL 3/2/05 12:13 PM Page 16 Saver Mid Mode Auto High Low Timer 2 1 2 3 8 9 8 7 3 5 6 4 1 BUTTON Mode BUTTON Timer BUTTON The appliance will be started when it is energized or will be stopped when it is in operation, if you press this button. Used to select the operation mode. Used to set or cancel timer operation. Remote control Indication symbols of LCD on remote control: 4 High BUTTON Used to select the high fan speed mode. 5 Mid BUTTON Used to select the Mid fan speed mode. 6 Low BUTTON Used to select the Low fan speed mode. 7 Auto BUTTON Used to select the Auto fan speed mode. 9 Saver BUTTON Used to select the Energy-saving mode. The Above symbols are shown when the relevant mode is in use. Auto fan speed Low fan speed Medium fan speed High fan speed Signal transmit Cooling Fan only Energy-saving When Changing modes during operation, sometimes the unit does not always respond at once. Wait 3 minutes. Wait 3 minutes before restarting the appliance. BUTTONS Used to set room temperature in Cooling mode or used to set time in Timer mode. Temperature setting range is from 19 (66 ) to 31 (88 ). Display set temp Display set timer Each time the Mode button is pressed, the operation modeis changed in sequence: COOLING FAN ONLY COOLING 15 OPERATING INSTRUCTIONS Used to set room temperature in COOLING mode or used to set time in TIMER mode. Temperature setting range is from from 19°C (66°F) to 31°C (88°F). WAC 8-24 USER MAN FINAL 3/2/05 12:13 PM Page 17 How to Insert the Batteries Remove the battery cover according to the arrow direction. Insert new batteries making sure that the (+) and (-) of battery are matched correctly. Reattach the cover by sliding it back into position. Note: Use 2 LR03 AAA (1.5volt) batteries. Do not use rechargeable batteries. Replace batteries with new ones of the same type when the display becomes dim. Remote control If the replacement is done within 1 minute, the remote control will keep original presetting. Operating Instructions How to Use To operate the room air conditioner , aim the remote control to the signal receptor. The remote control will operate the air conditioner at a distance of up to 23 feet whe...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: