Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
The full tank indicator light should now turn off. FIG.16 10 K0080-1-2 For Continuous Drainage: • Remove the drain knob and rubber plug from the drain hole and retain it for future use. • Connect the included drain tube to the drain hole. • Connect the other end of the tube to a drain (see Fig. 18). FIG.17 Please Note: 1. The drain must be at or below the level of the drainage port. 2. The full water tank indicator will not work when the unit is being continuously drained. 3. To extend the drain tube, you can connect it with another hose with an overall diameter of approximately 0.7” (18 mm). Original drain tube FIG.19 Extended drain tube (od:18mm) 11 K0080-1-2 For Heating Mode (AC-14000E Only): While using the heating function, please note the following: 1. In order to properly exhaust cool air, make sure the exhaust hose and window kit are properly installed (refer to page 4 for instructions). 2. Set up the air conditioner for continuous drainage using the included drain tube (refer to page 12 for instructions). 3. The working range for the heating function is 45° F to 77° F .The unit may not provide optimal heating if used in temperatures outside this range FIG.20 12 K0080-1-2 MAINTENANCE INSTRUCTIONS Always unplug the air conditioner from the power supply before cleaning. To maximize the efficiency of the air conditioner, regularly clean the unit. Cleaning the Housing: • Use a soft, damp cloth to wipe the body clean. • Never use harsh chemicals, gasoline, detergents, chemically treated cloths, or other cleansing solutions. These all could possibly hurt the cabinet. Cleaning the Filters: • Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt from the filters. Rinse the filters under running water (no warmer than 104oF). • Thoroughly dry the filters before replacing it back into the unit. • Do not use the air conditioner without the filters. End of Season Storage: • Completely drain out any condensed water from the unit. • Set the air conditioner on fan mode (ventilation only) for a few hours to dry the inside of the unit. • Clean or change the filter. • Unplug and wrap the power cord around the cord wrap as sown (Fig. 21). • Place the unit back in its original carton and store it in a clean, dry area. FIG. 21 13 K0080-1-2 TROUBLESHOOTING The air conditioner does not operate. Is the air conditioner plugged in? Is the power outlet functioning correctly? Is the full water tank indicator light flashing? Is the ambient room temperature lower than the set temperature? Is the filter dusty or dirty? Is the air inlet or outlet blocked? The unit does not produce adequate cooling. Is the unit placed in direct sunlight? If so, close any curtains or move the unit to a more shaded area. Are too many windows or doors open? Are there too many people in the room? Are there additional heat sources in the room? Is the filter dusty or dirty? Is the air inlet or outlet blocked? Is the ambient room temperature lower than the set temperature? The unit is noisy. Is the machine positioned unevenly? Make sure the air conditioner is placed on a level, solid surface. The compressor does not work. Is the compressor’s overheat protection function activated? If so, wait for the temperature to drop and then turn on the unit again. ☆ Never try to repair or dismantle the unit yourself. Unauthorized repairs can void your warranty and endanger the user. 14 K0080-1-2 TECHNICAL SPECIFICATIONS Model Number: AC-14000E AC-14000H Power/Ampere Consumption for Cooling* 1420W / 12.8A Power/Ampere Consumption for Heating* N/A 1420W / 12.8A Air Volume (max. speed) 450m3/h Voltage / Frequency 115V, 60Hz Compressor Type Rotary Refrigerant Type R-410A Number of Fan Speeds 3 Timer 1—24 hours Exhaust Pipe Dimensions 0 5.6" X 59.1" Net Weight 72.8 lbs Product Dimensions 17.7" x14.4" x 32.5" Notes: 1. Heating function is only for model number AC-14000H. 2. The data marked with may vary for technical reasons; for more accurate data, please refer to the rating label found on the back of the unit. 3. Measuring condition for the above specifications: Cooling - DB = 95° F , WB= 82.94°F Heating - DB= 68° F , WB= 59° F * D.B. = dry bulb temperature = room temperature *W.B. = wet bulb temperature = relative humidity * If you plug in the Air Conditioner, and there is no green light on the plug, press the reset button on the LCDI plug. The green light should be lit, indicating that the air conditioner is getting power from the electrical outlet. If the plug continues to trip (which is a USA national safety standard feature) and the green light goes off, the cord may be damaged preventing you from resetting the unit For your safety, contact a licensed electrician. Reset Button Test Button Green Light 15...
Эта инструкция также подходит к моделям:Кондиционеры - AC14000E (2.73 mb)