Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
Dehumidification (DRY) In Dehumidification mode, the system dries, filters and slightly cools room air temperature. This mode does not take the place of a dehumidifier. Remote Control The remote control transmits commands to set up and operate the system. The control has a window display panel that shows the current system status. The control can be secured to a surface when used with the mounting bracket provided. 2 3 PART NAMES Air outlet Air outlet Air inlet Air inlet 3 11 12 13 4 5 6 7 8 9 2 1 Front panel frame Front panel Air filter Horizontal air flow grille Vertical air flow louver Room temperature sensor Display panel Infrared signal receiver Remote control Interconnecting tubing Control and power wiring to indoor unit Service valves 1 3 4 5 6 7 8 9 11 12 13 2 INDOOR UNIT OUTDOOR UNIT 10 Remote control bracket 10 A07539A Indoor/Outdoor Unit 1 2 4 5 6 3 8 7 9 10 11 12 13 14 MODE FAN S P E E D T EMP. AIR DIR E C TION S WING L E D S L E E P TUR B O C L OC K TIME R CANC E L RESET F/C AUTO COOL DR Y HE AT FAN SET TE MP. CL OC K TIM ER ON TIM ER OFF SPEED AUTO L OW MED HIGH ON OFF 1 2 4 5 6 3 8 7 9 10 11 12 13 14 MODE BUTTON ON / OFF BUTTON FAN SPEED BUTTON AIR DIRECTION BUTTON SWING BUTTON LED BUTTON RESET BUTTON (Recessed) F/C BUTTON (Recessed) TEMP UP / TEMP DOWN BUTTONS SLEEP BUTTON CLOCK BUTTON TIMER BUTTONS CANCEL BUTTON TURBO BUTTON A08042 Remote Control UNIT DISPLAY PANELS NOTE: The display panel on the indoor unit will look like one of the following. Some of the functions will appear on the display panel, remote control or both. On the Unit: Infrared signal receptor OPERATIONTIMERPRE-DEFAUTOECON A08486 9K Infrared signal receptor TIMER OPERATION PRE-DEF A07544 12K AUTO TIMER PRE.-DEF* OPERATION A08483 18K - --24K *PRE- --DEF light will illuminate when the unit is running in FAN ONLY mode on Cooling Only units. Note: Cooling only units have same LED lights but without PRE- --DEF print. OPERATION: This indicator flashes once per second after power is on and illuminates when the unit is in operation. TIMER: This indicator illuminates when TIMER is set ON or OFF. PRE.- --DEF indicator (heat pump units only): Pre- --Def indicator illuminates when the coil is warming up to prevent cold blow or when unit goes into defrost mode. AUTO indicator: When air conditioner is set to AUTO mode, the indicator illuminates. FANONLYindicator: When air conditioner is set to FAN ONLY mode, this indicator illuminates. NOTE: All the pictures in this manual are for demonstration purposes only. The actual shape of your air conditioner may be slightly different, but the operation instructions are the same. Remote Control Display 1 2 9 12 3 4 TRANSMISSION INDICATOR: Illuminates when remote control transmits signals to the indoor unit. MODE DISPLAY: Indicates the current operation mode “AUTO”, “COOL”, “DRY”, “HEAT” (heat pumps only), or “FAN”. ON/OFF INDICATOR: This symbol appears when the unit is turned on by the remote control, and disappear when the unit is turned off. TEMPERATURE DISPLAY: Temperature setting from 62_F(17_C) to 88_F(30_C) will be displayed. If FAN mode is selected, there will be no temperature displayed. AUTO COOL DRY HEAT FAN SET TEMP. CL OC K TIM ER ON TIM ER O FF SP EE D AUTO LOW MED H IGH 456387 A08043 CLOCK DISPLAY: Indicates the current time (0 to 24 hours). TIMER DISPLAY: Indicates the set times for the timer operation (0 to 24 hours). LOCK DISPLAY: Displays when settings are locked. FAN SPEED DISPLAY: Indicates the set fan speed. AUTO is displayed when unit is running in AUTO or DRY mode. SLEEP DISPLAY: Indicates unit is running in SLEEP mode. 56789 NOTE: Symbols shown in this manual are for the purpose of demonstration. During actual operation, only the relevant symbols are displayed. 4 5 REMOTE CONTROL MODE FAN S P E E D T EMP. AIR DIR E C TION S WING L E D S L E E P TUR B O C L OC K TIME R CANC E L RE SE T F/C AUTO COOL DR Y HE AT FAN SE T TE MP. CL OC K TIM ER ON TIM ER OF F SPE ED AUTO L OW MED HIGH ON OFF A08032 EQUIPMENT DAMAGE HAZARD Failure to follow this caution may result in equipment damage. Handle the control with care and avoid getting the control wet. ! CAUTION IMPORTANT: The remote control can operate the unit from a distance of up to 25 ft. (7.6 m) as long as there are no obstructions. This is one way communication only (from remote control to fan coil). When the timer function is used, the remote control should be kept in the vicinity of the fan coil (within 25 ft / 7.6 m) The remote control can perform the following basic functions: S Turn the system ON and OFF S Select operating mode S Adjust room air temperature set point and fan speed S Adjust airflow direction Refer to the Remote Control Function section for detailed description of all the capabilities of the remote control. Battery Installation Two AAA 1.5 v alkaline batteries (included) are required for operation of the remote control. To install or replace batteries: 1. Slide the back cover off the control to open the batt...
Эта инструкция также подходит к моделям:Кондиционеры - 538MAC (1.14 mb)
Кондиционеры - 538MNC (1.14 mb)
Кондиционеры - 538MNQ (1.14 mb)