Оценок - 3, средний балл: 3
(
)
)
|
Фрагмент инструкции
• Doors or windows are open • The air filter is clogged with dust • The louver is not at the correct position. • The fan speed is set to low. • The temperature setting is too high or too low. Room air is smelly. A bad odor comes from the air conditioner. • Smells impregnated in the wall, carpet, furniture, clothing, or furs, are coming out. A white mist of chilled air or water is generated from the outdoor unit. CAUTIONS lf any of the following conditions occur, stop the air conditioner immediateiy, set to off the power switch, and contact the dealer: • The indicator lamps flash rapidly (five times per second), you disconnect the unit with the power and then connect the unit with the power again after two or three minutes but the lamp still flash. • Switch operations are erratic. • The fuse is blown frequently or the circuit breaker is tripped frequenly. • Foreign matter or water has fallen inside the air conditioner. • Any other unusual condition is observed. 06Manual 22Daitsu ENG 21/12/06 16:17 Pagina 85 TROUBLES AND CAUSES (CONCERNING REMOTE CONTROLLER) Before you ask for servicing or repairs, check the following points. Simtoms Causes Reason and disposal Check whether the MODE indicated on the display is "AUTO" AUTO When the automatic mode is selected, the air conditioner automatically selects the fan speed. The fan speed can not be changed Check whether the MODE indicated on the display is "DRY" DRY When dry operation is selected, the air conditioner autornaticaily select the fan speed. The fan speed can be selected during "COOL" and "FAN ONLY' and "HEAT" (cooling only type without) The Transmission Indicator “ “ never comes on Simtoms Causes Reason and disposal The remnote control signal is not transmitted even when the ON/OFF button is pushed. Check whether the ON TIMER is indicated on the display. The remote controi signal is not transmitted, because the air conditioner is off. The TEMP. indicator does not come on Simtoms Causes Reason and disposal The TEMP. indicator does not come on. Check whether the MODE indicated on the display is "FAN ONLY'. The temperature cannot be set during fan only operation. The Display Goes Off Simtoms Causes Reason and disposal The indication on the display disappears after a lapse of time. Check whether the timer operation has come to an end when the OFF TIMER is indicated on the display. The air conditioner o eration stops since the set time elapsed. The TIMER indicators goes off after a lapse of certain time. Check whether the timer operation is started when the ON TIMER is indicated on the display. When the time set to start the air conditioner is reached, the air conditioner will automaticaily start and the appropriate indicator will go off. The Signal Receiving tone does not sound Simtoms Causes Reason and disposal No receiving tone sounds from the indoor unit even when the ON/OFF button is pushed Check whether the signal transmitter of the remote controller is property directed to the receiver of the indoor unit when the ON/OFF button is pushed Direct the signal transmitter of the remote controller to th receiver of the indoor unit, and then rapidly push the ON/ OFF button twice. ENGLISH 85 06ManualMandoDaitsuEng 21/12/06 16:17 Pagina 86 REMOTE CONTROLS AND THEIR FUNCTIONS Remote control MODE SELECT BUTTON • Each time you push the button, a mode is selected in a sequence that goes from AUTO, COOL, DRY, HEAT (cooling only type without), FAN ONLY and back to AUTO. FAN SPEED BUTTON • This button is used for selecting fan speed. Each time you push the button, a fan speed is selected in a sequence that goes from AUTO, LOW, MED, HIGH, and back to AUTO. ON/OFF BUTTON • Push the button to start operation, push the button again to stop operation. TEMPERATURE BUTTON The set temperature is increased to 30°C The set temperature is decreased to 17°C SLIDE THE COVER ENGLISH 86 06ManualMandoDaitsuEng 21/12/06 16:17 Pagina 87 REMOTE CONTROLS AND THEIR FUNCTIONS Remote control WIND DIRECTORY BUTTON • Push this button to change the swing angle of louver. (This is not conform to the unit without this function.) AUTO LOUVER BUTTON • Push this button to swing louver. Push the button again to stop. RESERVE BUTTON ECONOMY RUNNING BUTTON • Push this button to set the economical operation mode (some models without). ON/OFF TIMER BUTTON • Push TIMER ON timer button to set the ON timer. • Push TIMER OFF timer button to set the OFF timer. TIME ADJUST BUTTON • This button is used for setting the current time and OFF time. CANCEL BUTTON • Push this button to cancel ON timer and OFF timer. RESET BUTTON • Push this button to reserve ON timer and OFF timer settings. CLOCK BUTTON • Push this button to set time. LOCK BUTTON ENGLISH • When you push the LOCK button, all current settings are locked in and the remote controller does not accept any operation except that of the LOCK button. Use the lock mode when you want to prevent setting from being changed accidentally or playfully. Push the LOCK bu...
Эта инструкция также подходит к моделям:Кондиционеры - ASD 129U11 (1.52 mb)