Войти:
Оценок - 3, средний балл: 4.3 ( )

Инструкция по эксплуатации Quasar, модель HQ-2122UH

Производитель: Quasar
Размер: 1.69 mb
Название файла:
Язык инструкции:
Перейти к скачиванию



Фрагмент инструкции


Window sash sealing ribbon 1 Slide the chassis into the cabinet. 2 Reinstall the cabinet screws. Secure the cabinet to chassis by using screws (from rear cabinet). INSTALLATION OF THE FRONT GRILLE Depending upon the location of the AC outlet, route the AC cord to either the left or right side while installing the front grille. This figure shows the AC cord routed to the left side. INSERT THE (OPTIONAL) Attach the (part no. CZ-SF6P) to the frame. Slot in the and the frame (part no. CZ-SFW6P) to the front grille. The and the frame can be obtained separately from your nearest service center. INSERT THE AIR FILTER Attach the air filter to the intake grille PLACE FRONT INTAKE GRILLE OVER THE FRONT GRILLE Slide the front intake grille slightly to the right to reattach the tabs and then push it down to close tight. NOTE This procedure applies to left and right of assembling expandable panel. OFF/ON OPERATION TEMP/TIMER COOL FAN HIGH MED LOW MODE FAN SPEED SET TIMER SET/ CANCEL AIR SWINGECO NOMY hr °F Wireless Remote Control OFF/ON OPERATION TEMP/TIMER COOL FAN HIGH MED LOW MODE FAN SPEED SET TIMER SET/ CANCEL AIR SWINGECONOMY hr °F Wireless Remote Control OFF/ON OPERATION TEMP/TIMER COOL FAN HIGH MED LOW MODE FAN SPEED SET TIMER SET/ CANCEL AIR SWINGECONOMY hr °F Wireless Remote Control OFF/ON OPERATION TEMP/TIMER COOL FAN HIGH MED LOW MODE FAN SPEED SET TIMER SET/ CANCEL AIR SWINGECONOMY hr °F Wireless Remote Control OFF/ON OPERATION TEMP/TIMER COOL FAN HIGH MED LOW MODE FAN SPEED SET TIMER SET/ CANCEL AIR SWINGECONOMY hr °F Wireless Remote Control OFF/ON OPERATION TEMP/TIMER COOL FAN HIGH MED LOW MODE FAN SPEED SET TIMER SET/ CANCEL AIR SWINGECONOMY hr °F Wireless Remote Control 1 Place the front grille on the cabinet first. 2 Secure the front grille to the main chassis using screw provided. 15-15/16” (min) 22 to 42-1/8” Top sealing ribbon (To be attached to the top angle) Side sealing ribbon (To be attached to the expandable panel) Window sash foam seal Type A screw Type B screws Window sill Type A screws Expandable panel Outside of sash Window sash Top angle Sealing ribbon Inside of sash OFF/ON OPERATION TEMP/TIMER COOL FAN HIGH MED LOW MODE FAN SPEED SET TIMER SET/ CANCEL AIR SWINGECONOMY hr °F Wireless Remote Control Clockwise. 1 Air inlet louver 4 Air filter (behind the front intake grille) 2 Cabinet 5 Front intake grille 3 Power cord 6 Front grille 7 Vertical airflow direction vane (Airflow direction adjustment updown). The vertical airflow direction vane is controlled by rotating the horizontal vane forward or backward. 2 AIR CONDITIONER INSTALLATION 3 PART IDENTIFICATION REMOVAL OF FRONT GRILLE 1 Remove the front intake grille. Pull up the front intake grille about 90° and slide it slightly to the left to unhook the tabs. 2 Remove the air filter. Tilt up and pull out the air filter by the holder. 3 Remove the front grille. a At bottom right side of the front grille, press inward on c...

Эта инструкция также подходит к моделям:
Кондиционеры - HQ2122UH (1.69 mb)
Кондиционеры - HQ-2102UH (1.69 mb)
Кондиционеры - HQ-2122UH (1.69 mb)
Кондиционеры - HQ-2102UH (1.69 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории