Войти:
Оценок - 2, средний балл: 4.5 ( )

Инструкция по эксплуатации Frigidaire, модель 309000834

Производитель: Frigidaire
Размер: 176.82 kb
Название файла: 15b401f0-24d7-4ba0-823f-3a14a2d30cf3.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Set the exhaust vent to the CLOSED position. 3. Adjust the louvers for comfortable air flow. Review the “Air Conditioner Features” section for other settings. Air Conditioner Feature s ELECTRONIC CONTROL OPERATING INSTRUCTIONS Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the touch pad alone or with the remote. LOWERS DISPLAYS TEMPERATURE TEMPERATURE/TIME OR TIME TURNS UNIT ON OR OFF RAISES TEMPERATURE OR TIME SETS FAN SPEEDS SETS MODE SETS HOURS batteries supplied will first need to be installed. the battery end and the connector. For some applications the Slip battery cover off and pull the piece of plastic from between PLASTIC PIECE STEP 1 — TO TURN UNIT ON: YOU WILL SEE: REMOTE CONTROL DO THIS: PRESS ON/OFF PAD Note: Remember that in this mode, the fan will run continuously while the compressor cycles on and off as needed to maintain the room temperature. (See also, power saver mode, step 6) 6 Air Conditioner Feature s (continued) STEP 2 — TO CHANGE TEMPERATURE SETTING: YOU WILL SEE: DO THIS: PRESS TO RAISE PRESS TO LOWER Note: Tap or hold either up(^) or down(v) button until the desired temperature is seen on the screen. This temperature will be automatically maintained anywhere between 60F (15C) and 90F (32C). If you want the display to read the actual room temperature, see step 5. STEP 3 — TO CHANGE YOU WILL SEE (WHICHEVER FAN SPEEDS: YOU HAVE CHOSEN): DO THIS: PRESS WHICHEVER YOU PREFER STEP 4 — TO ALLOW CONTROL TO CHOOSE FAN SPEED: YOU WILL SEE: DO THIS: PRESS AUTO Note: The fan speed will begin in HI, then adjust to MED and LO as the room temperature conditions dictate. For example, if the room doesn’t get too warm it will stay at LO. If the room temperature rises quickly, such as a door being opened, it will automatically go to HI speed. The fan speeds will readjust back to LO as the room returns to the original set temperature. 7 Air Conditioner Feature s (continued) STEP 5 — TO OPERATE ON FAN ONLY: YOU WILL SEE: DO THIS: PRESS ON (if not running) PRESS FAN ONLY CHOOSE ONE Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air.(remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer. (Note: The “AUTO” setting will not operate in FAN ONLY.) During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode. STEP 6 — TO USE THE ENERGY SAVER FEATURE: YOU WILL SEE: DO THIS: PRESS ENERGY SAVER Note: In this mode, when the compressor shuts off, the fan will continue to run for another 3 minutes, then shut off until cooling is needed, as sensed by the room temperature control. During this time, it may come on for 3 minutes to sense whether cooling is needed, then it will go off for 15 minutes. It will continue doing this to sample the room air for as long as necessary. STEP 7 — TO SET FOR DELAYED START: YOU WILL SEE: DO THIS: PRESS OFF (If unit is running) PRESS TIMER/OFF Note: To do this, the unit must be in the off position. When first set, the display will show .5 (one half hour), to increase the time up to 24 hours, go to step 8. 8 Air Conditioner Feature s (continued) STEP 8 — TO INCREASE DELAYED START TIME: YOU WILL SEE TIME CHOSEN: DO THIS: PRESS Note: Tap or hold the UP arrow(^) to increase delayed start time by .5 hours (up to 10 hours), then in 1 hour increments up to 24 hours. The control will count down the time remaining until start (8, 7.5, 7, etc.). The unit will then come on in Cool and HI fan mode. The temperature maintained will be the same as you previously set. If youwant to change it, Press ‘Cool” then Up or Down arrows until the desired temperature is indicated on the display. Press Timerpad again to show remaining time. Switching unit on at any time will nullify this setting. STEP 9 — TO SET FOR DELAYED STOP: YOU WILL SEE: DO THIS: PRESS (if unit is not running) PRESS Note: The unit must be running to make this setting. Proceed as in step 8 to change the desired number of hours. The display will then continue to show hours and continue to maintain last temperature setting until the control will time out and turn the unit off. STEP 10 — TO TURN UNIT OFF: YOU WILL SEE: DO THIS: PRESS ON/OFF PAD Note: The control will always maintain the last setting when it is restarted next time. 9 Air Conditioner Feature s (continued) ADDITIONAL THINGS YOU SHOULD KNOW Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with. • Remote control works exactly like the control panel, follow the same instructions. • The “Cool “ circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents overheating of the compressor and ...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории