Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Cooling mode: When difference between room temperatureand set temperature is Fan speed RT .Y T+3..High T+3.. .. RT .Y T+1..Medium RT.. T+1.. Low Mild drying mode: When difference between room temperatureand set temperature is Fan speed RT .Y T+5..High T+5....RT .Y T+3..Medium T+2.. .U Rt.UT+3.. Low Heating mode: When difference between room temperatureand set temperature is Fan speed RT .Y T-3..High T-3....RT .U T-1..Medium T-1....Rt..T Low NOTE The above table assumes that the sensor on the remote control is being used. If the sensor in the indoor unit is being used (the indicator is on), actual operation may differ slightly from the operation decried in tables. B. Manual If you want to adjust the fan speed manually during operation, just set the FAN SPEED selector as desired.[ (High), (Medium), or (Low)] 10 Adjusting the Airflow Direction 1. Horizontal The horizontal airflow can be adjusted by moving the vertical vanes wit your hands to the left or right. ! CAUTION 2. Vertical When the humidity is high, the vertical vanes should be in the frontposition during the cooling or dehumidifying operation. If the verticalvanes are positioned all of the way to the right or left, condensation maybegin to form around the air vent and drip down. The vertical airflow can be adjusted by moving the flap with the remote control unit has been turned on. Then, use the FLAP button to set either the sweep function or one of the six airflow direction settings. FLAP ON OFF SET CLR SLEEP A/C SENSOR ACL BATTERY FAN SPEED MODE SOFT 12 3 4 5 6 SWEEP COOL and DRY HEAT A.Sweep function The flap starts moving up and down to deliver air over the sweep range. B.Automtic Function The flap moves up and down automatically from to during the cooling or drying operation, from to duing the heating operation. Referring to the above illustration. ! NOTE .nThe flap automatically closes when the unit is off. ! CAUTION .nUse the FLAP button on the remote control to adjust the position of the flap. If you move the flap by hand, the flap position according to the remote control and the actual flap position may no longer match.If this happens,shut off the unit, wait for the flap flap to close, and then turn on the unit again; the flap position will now be normal again. .nDo not have the flap pointed down during cooling operation. Condensation May begin to from around the air vent and drip down. 11 Night Setback / Simultaneous Use Energy Saving C FLAP ON OFF SET CLR SLEEP A/C SENSOR ACL BATTERY FAN SPEED MODE AUTO AUTO SOFT 1HR ON/OFF TEMP HIGH POWER C AUTO AUTO A Simultaneous Use Energy Saving Mode .nNight Setback Mode Night Setback Mode is used for saving energy. Press the SLEEP button in operation. The mark apperars in the display. To release the night Setback function, press the SLEEPbutton again. NOTE This function loses is automation or airflow mode. B.In Cooling and DRY Mode: When the night setback mode is sescted, the air conditioner automatically raises the temperature, setting 1.. when 60 minutes have passed, and at last stops operating automatically after lasting about 6 hours at this temperature, regardless of the indoor temperature when night setback was selected. This Enables you to save energy without sacrificing comfort. This Function is convenient when gentle cooling is needed. Setting temperature Stop operating Automatically 1 2 3 4 5 6 7 8(Hour) Press the SLEEP button B.In heating Mode: When the night setback mode is selected, the unit automatically drops the temperature setting 2 .. when 1 hour has passed when the selection was made, and another 2 .. after another 1 hour has passed, and then raises 1.. after 3 hours, at last stops operating automatically at this temperature after another 3 hours. Setting temperature Stop operating Automatically 12345678 (Hour) Press the SLEEP button .nSimultaneous Use Energy Saving Mode Limit the maximal current to work with other appliances in the perk hours of using electricity, press the SOFT button to select the simultaneous Use Energy Saving function, and press the button once again to cancel the function. If the capacity of heat or cool is not enough to reach the set temperature in the summer day or winter night, you can cancel Simultaneous Use Energy Saving function to resume normal operation. The Simultaneous Use Energy Saving function can NOTE not be canceled by pressing the ON/OFF button. 12 Using the 1-Hour OFF Timer C 1HR ON/OFF TEMP HIGH POWER FLAP ON OFF SET CLR SLEEP A/C SENSOR ACLBATTERY FAN SPEED MODE AUTO AUTO SOFT 1HOUR1HOUR HIGH POWER Operation C 1HR ON/OFF TEMP HIGH POWER FLAP ON OFF SET CLR SLEEP A/C SENSOR ACLBATTERY FAN SPEED MODE AUTO AUTO SOFT 1HOUR1HOUR This function causes the system to operate for one hour and then stop, regardless of whether the unit is on or off when this button is pressed. The " 1HOUR1HOUR " indicator in the display indicates that this function is operating. Setting procedures: Regardless of whether the unit is operating or stopped, press the 1 HR ....
Эта инструкция также подходит к моделям:Кондиционеры - KFR 2601GW/BPE (214.42 kb)