Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
TIME indicator Indicates timer time. (SET TEMPERATURE button ) This button sets the room temperature. C MODE button This button changes the operation mode: AUTO.COOL.DRY, HEAT, FAN. ( FAN SPEED button ~ This button set air rate. Ç TURBO button" This button changes to TURBO operation (It does not work in AUTO,DRY,and FAN mode.) TIMER button This button is used to set the switch-on or switch-off and the timer time. SLEEP indicator_J Indicates during sleep operation. ^ TURBO indicator ) Indicates during TURBO operation. Keylock indicator ) { FAN SPEED indicator ) Indicates the seted air rate. ON/OFF button_) This button, when pressed starts operation and stops when repressed. SWING button ~^) This button changes the flap mode:natural flow .swing or fixed wind. { AIRFLOW button(optional) ) This button used for selection of the lefl/right air flow direction,whenever pressed the in flap will swing or fix(lt just works on threedimensional air flow model.) SLEEP button J This button changes to SLEEP operation. HOLD button Press this button to lock or unlock the keyboard. NOTE: 0 Above figure shows all indications for the purpose of explanation, but practically only the pertinent parts are indicated.When air-conditioner is cooling-only model, the HEATis for FAN. O When TURBO operation is selected,room temperature is not controlled with operation being continually.lf you feel the room temperature is too cool or too heat,please cancel the TURBO operation. (Transmission procedure) ( dj When each button on the remote controller is pressed with the remote controller pointing toward the air conditioner unit, signal is sent. When the signal is received correctly, the receiving sound is emitted v i from the unit. USER'S MANUAL Split Wall-Mounted Air Conditioner I Use of remote controller! OPERATING MACHINE IN SELECTED MODES 1. Point the remote controller at the unit,press the ON/OFF button,then press the MODE button,select the needed mode: ATUO,COOL,DRY,HEAT,or FAN. 2. Press the SET TEMPERATURE button to increase or decrease the readings until the needed temperaure is displayed.The room set temperature range is from 16‘C-32‘C(6rF-90‘F). (It would be automatically set at 25"C(76‘F) and unadjustable in AUTO and DYR mode.) 3. Press the FAN SPEED button to choose the air rate you want:Low(display indicates" -"),Med(display indicates "",Hi(display indicates" *i*",Auto(display"*i* "indicator flashing). (It would be automatically set at low speed and unadjustable in DRY mode.) 4. Press the SWING button to choose the up/down air flow direction you want:natural flow( display indicates " ( "),swing(display" (" indicator flashing) .fixed wind(display indicates" '"). (It would be automatically set at fixed wind air flow direction in DRY mode.) TURBO OPERATION Press TURBO button during COOL or HEAT operation,the air rate can be setted in HIGH .Press the TURBO button again can release the TURBO operation. Note: during TURBO operation,the air rate cann’t be changed. ADJUSTING LEFT/RIGHT AIR FLOW DIRECTION Methods 1 : Manually adjust Adjust the direction by moving directly the left/right air flow direction adjusting fin by hand. Caution:when adjust the direction,stop air conditioner. Methods 2:Horizontal & vertical auto swing(three-dimensional air flow mod...
Эта инструкция также подходит к моделям:Кондиционеры - Amcoraire AOS090HR (4.59 mb)
Кондиционеры - Amcoraire AOS120HR (4.59 mb)
Кондиционеры - Amcoraire AOS240HR (4.59 mb)
Кондиционеры - Amcoraire AWS090HR (4.59 mb)