Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
This guarantee is only applicable if the appliance has been installed in accordance with the installation/positioning instructions detailed in the booklet. To help make the best use of your Air Conditioner, please read this booklet carefully. The guarantee is subject to the provisions that the appliance: (a) Has been used solely in accordance with the User Instruction Book. (b) Has been properly connected to a suitable supply voltage as stated on the rating plate attached to the appliance. (c) Has not been subjected to misuse or accident or been modified or repaired by any person other than the authorised employee or agent. (d) Has been correctly installed. This appliance conforms to the following EEC Directives: « Low Voltage Equipment 73/23/EEC 93/68/EEC Electromagnetic Compatibility 89/336/EEC 92/31 /EEC 93/68/EEC 3 PRODUCT IDENTIFICATION / FEATURES Rear view 1. Control panel 2. Adjustable Air Outlet Grille 3. Transportation Handles (both sides) 4. Return Air grille (both sides) 5. Transportation Wheels 6. Flexible Air Outlet Tube For best results it is recommended that only one flexible air outlet tube is used. The second tube supplied is only for use when a high window is used for venting. 7. Exhaust Air nozzle 8. Air Filter (both sides) (withdraw filters from the rear of the unit) 9. Electric Supply Cable 10. Access Door to condensate water tank 11. Rating Plate Product Weight: 36Kg Operating Limits: Temperature: Room Sizes: MIN 19° C Up To 20m: * MAX 32° C * Assuming 2.5m ceiling height and average operational temperature of 25° C CONTROL PANEL 1. Adjustable Air Outlet Grille 2. Electronic Thermostat Selector 3. Advice Label 4. ON/OFF Push-Button Switch Push button In for ON. Push button Out for OFF. /\lways allow at least 3 minutes between each usage to allow the compressor to operate to the optimum performance. 5. Cooling Push Button 6. High Speed Fan Push-Button 7. Low Speed Fan Push-Button o ❖ 8. Condensate Water Tank “Full” Neon The air conditioner will not work if the neon is lit and flashing. In this case the condensate water lank MUST be emptied (See Condensate Water lank Section) ELECTRICAL REQUIREMENTS Supply This appliance should be connected to the mains supply via a suitable switched socket, which is in a position accessible after installation. Refer to rating plate for the supply voltage. Warning: This appliance must be earthed. Changing the Plug The flexible mains lead is supplied connected to a BS1363 fused plug with a 13 amp capacity. If this plug is removed or cut off, it should be properly disposed of and not left where children might flad it and plug into a supply socket - with the obvious consequent danger of electrocution. Rewirable Plug The wires in the mains lead are in accordance with the following: GREEN & YELLOW TO EARTH GREEN/YELLOW - EARTH BLUE - NEUTRAL BROWN - LIVE If the plug is changed, the coloured wires in the mains lead may not correspond with the colours of the markings identifying the terminals in the plug. Therefore wire is as shown above. Should the mains lead ever require replacement, this operation must be carried out by a competent person. Only use specially prepared 3 core 1.50mm2 recommended spares cable. NEUTRAL CLAMP Moulded Plug The correct replacement of the fuse is identified by the colour coding in the base of the plug or the colour that is embossed in words in the base of the fuse recess, or elsewhere on the plug. Only 13 amp replacement fuses which are ASTA approved to BS1362 should be fitted. After replacement of a fuse in the plug, the fuse cover must refitted. Fuse covers may be obtained from your local Regional Electricity Company. Warning: The plug must net be used without a fuse cover. NOTE: Replacement mains cables must only be obtained from our recommended Spares stockist. NOTE: If in doubt consult a qualified electrician. FLEXIBLE AIR OUTLET TUBE To achieve the best results when using your air conditioner we recommend that only one length of flexible air outlet tube is used wherever possible. If required, the two flexible air outlet tubes supplied can be connected together to allow venting of the air conditioner through a high window. Please note that performance of the air conditioner will be reduced when using this method of venting. It is advised wherever possible that the air conditioner is vented using only one flexible air outlet tube. When using the second flexible air outlet tube the distance from the floor to the top of the flexible air outlet tube Must Not exceed 2 metres. 6 INSTALLATION / POSITIONING There are 3 methods of installing / positioning your air conditioner unit: 1. Positioning the flexible air outlet tube through an open window. 2. Positioning the flexible air outlet tube through a porthole in the window-pane using the adaptor provided. 3. A more permanent installation using a Wall / Window Kit. 1. Positioning the flexible air outlet ...