Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Set the temperature. (16°C~30°C) . Supersonic air purifying device (super alleru-buster) operates automatically once the unit is switched on. . and operations are available in all modes. . Press, again to stop the operation. • In heating mode, it takes a while for the unit to warm up. The power indicator blinks during this operation. COOL - Cooling Operation • Enjoy cool air at your desired temperature. DRY - Soft Dry Operation • Keeps your environment dehumidified by running a very gentle cooling operation. • During soft dry operation, the indoor fan operates at low fan speed. ¦ Hint • A temperature setting 1°C higher in cooling operation or 2°C lower in heating operation than the desired temperature equates to a 10% power saving. Troubleshooting . Mist emerges from indoor unit. > Condensation effect due to cooling process. . Heating/Cooling operation does not work. > Ensure temperature is set correctly. > Make sure windows and doors are closed. > Make sure filters are cleaned and replaced. > Make sure inlet and outlet vents are cleared. . Water flowing sound during operations. > Cause by refrigerant flow inside the unit. . The power indicator blinks during the operation and the indoor fan is stopped. > The unit is in defrost mode, and the melted frost is drained from the outdoor unit. 5 ¦ Operations Details • There are 5 fan speeds, as well as automatic*. * For automatic fan speed, the speed of the indoor fan is automatically adjusted according to the operation. FAN SPEED, AIR SWING Troubleshooting Select fan speed. FANSPEEDAIRSWINGAUTOHEATCOOLDRYIONOFF/ONTEMPMODEQUIETAIR SWINGTIMERONSETOFFCANCELACRCRESETSETCHECKCLOCKINVERTER132POWERFULFAN SPEEDion Adjust the airflow direction louver. • If automatic vertical airflow direction has been set, the louvers swing up and down automatically. • For HEATING operation, the air blows horizontally for a while, then starts to blow downwards. • Keeps the room ventilated. • There are 5 options for vertical/ horizontal airflow direction. • Do not adjust the vertical and horizontal louvers by hand. AIR SWING . The room has a peculiar odour. > This may be a damp smell emitted by the wall, carpet, furniture or clothing. . Indoor fan stops occasionally during automatic fan speed setting. > This helps to remove the surrounding odours. . Indoor fan stops occasionally during heating operation. > To avoid unintended cooling effect. • If automatic horizontal airflow direction has been set, the louvers swing left and right automatically. • For HEATING operation, the airflow louvers start to swing left/right after the temperature rises. ENGLISH POWERFUL, QUIET, ION ¦ Operations Details • To achieve setting temperature quickly. • To provide a quiet environment. POWERFUL, QUIET, ION ¦ Operations Details • To achieve setting temperature quickly. • To provide a quiet environment. Enables powerful operation. Enables Enables ion quiet operation. • This setting provides fresh air effect operation. by producing negative ion. • Ion operation can be activated independently. Press to turn off the operation. ¦ Hint • To reduce power consumption, close the curtains when operating air conditioner to prevent the sunlight and heat from coming in. . and operations could not be activated at the same time. . , and operations could be cancelled by pressing the respective button again. Troubleshooting . Noisy during operation. > The unit may have been installed at an incline, or the front panel is not closed properly. . Operation is delayed a few minutes after restart. > The delay is a protection to the unit’s compressor. . Outdoor unit emits water/steam. > Condensation or evaporation occurs on pipes. . ION indicator on the indoor unit is blinking. > Press twice. If the indicator is still blinking, please consult your nearest dealer. 7 ¦ Operation Details TIMER FANSPEEDAIRSWINGAUTOHEATCOOLDRYIONOFF/ONTEMPMODEQUIETAIR SWINGTIMERONSETOFFCANCELACRCRESETSETCHECKCLOCKINVERTER132POWERFULFAN SPEEDionSelect ON or OFF timer. 11Set the desired time. 22Confirm the setting. 33Cancel the selected timer. • The timer allows you to turn the air conditioner on or off automatically. • The unit may start in preliminary operation before the actual set time when ON timer has been set. • The set timer repeats daily once set. • If there is a power failure, you can restore the previous setting (once power is resumed) by pressing the button. • If the timer is cancelled, press to restore the previous setting. Troubleshooting . Timer indicator always on. > The timer setting repeats daily once set. . Remote control does not work. > The batteries are inserted incorrectly or need replacing. . The unit does not work. > The circuit breaker is tripped or the timer is set incorrectly. . Power indicator blinks before the unit is switched on. > This is a preliminary step in preparation for the operation when the ON timer has been set. ¦ Hints • Press and hold the for approximately 5 seconds to set either 12-hour (am/pm) or 24-hour time in...
Эта инструкция также подходит к моделям:Кондиционеры - CS-E28EKR (2.22 mb)