Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Please check for the recent update on your product. Fujitsu Welcomes Your Comments We would appreciate your comments and suggestions to improve this document. You can submit your comments by using "Reader's Comment Form"\ Reader's Comment Form FOLD AND TAPE FOLD AND TAPE BUSINESS REPLY MAIL FIRST-CLASS MAIL PERMIT NO 741 SUNNYVALE CA NO POSTAGE NECESSARY IF MAILED IN THE UNITED STATES POSTAGE WILL BE PAID BY ADDRESSEE FUJITSU COMPUTER SYSTEMS ATTENTION ENGINEERING OPS M/S 249 1250 EAST ARQUES AVENUE P O BOX 3470 SUNNYVALE CA 94088-3470 SPARC Enterprise T2000 Server Site Planning Guide This guide provides the specifications and site requirements you need when planning the installation of the server. For safety and compliance information, refer to the SPARC Enterprise T2000 Server Safety and Compliance Guide and the documentation that came with your server. This guide contains the following sections: ¦ “Physical Specifications” on page 2 ¦ “Minimum Clearance for Service Access” on page 2 ¦ “Environmental Specifications” on page 3 ¦ “Power Source Requirements” on page 3 ¦ “Acoustic Noise Emissions” on page 4 ¦ “Agency Compliance Specifications” on page 4 ¦ “Recommended Operating Environment” on p age 4 Physical Specifications Measure U.S. Metric Width 16.7 inches 425 mm Depth 24.4 inches 621 mm Height (2 rack units) 3.5 inches 89 mm Weight, approximate (without PCI cards and rack mounts) 40 lbs 18 kg Minimum Clearance for Service Access Description Specification Clearance, front of system 36 in. (91 cm) Clearance, rear of system 36 in. (91 cm) Environmental Specifications Specification Operating Non-operating Operating temperature: • Sea level to 3000 ft (900m) • Above 3000 ft (900m) • 41°F to 95°F (5°C to 35°C) • Decrease maximum temperature as altitude increases, 1.6°F/1000 ft (1°C/300m) -40 to 60°C -40 to 60°C Humidity 20 to 80% RH, non-condensing, 27°C wet bulb, IEC 60068-2-3&56 98% RH 38°C, non-condensing, IEC 60068-2-3&56 Altitude 0-3,000 meters (0-10,000 feet) IEC 60068-2-13 0 - 12,000 meters (0-40,000 feet) IEC 60068-2-13 Vibration 0.2 Gs, Swept sine 5-500-5Hz, 1 octave/min, all axes, IEC 60068-2-13 1.0 Gs, Swept sine 5-500-5Hz, 1 octave/min, all axes, IEC 60068-2-13 Shock 5 Gs peak 11 milliseconds, half-sine pulse, IEC 60068-2-27 30 Gs peak 11 milliseconds, half-sine pulse, IEC 60068-2-27 Power Source Requirements The server has two autoranging power supplies. To ensure redundant operation of the power supplies, the two power cords should be connected to separate AC circuits. Description Specification Operating input voltage range 100 to 240 VAC, 50-60 Hz Maximum operating input current 4.5 A at 100 to 120 VAC 2.25 A at 200 to 240 VAC Maximum operating input power 450 W Maximum heat dissipation 1,365 BTU/hr. (1,440 KJ/hr.) Acoustic Noise Emissions Declared noise emissions are in accordance with ISO 9296 standards. Description Mode Specification LwAd (1 B = 10 dB) Operating acoustic noise Idling acoustic noise 7.7 B 7.7 B LpAm (bystander positions) Operating acoustic noise Idling acoustic noise 62 dB 62 dB Agency Compliance Specifications See the SPARC Enterprise T2000 Server Safety and Compliance Guide for a full list of agency compliance specifications. Recommended Operating Environment Your environmental control system must provide intake air for the server that complies with the limits specified in “Environmental Specifications” on page 3. To avoid overheating, do not direct warmed air: ¦ Toward the front air intake of the server ¦ Toward the server access panels Note – When you receive your system, place it in the environment in which you will install it. Leave it in its shipping crate at its final destination for 24 hours. This resting period prevents thermal shock and condensation. The system has been tested to meet all functional requirements when operating in the operating environmental limits presented in “Environmental Specifications” on page 3. Operating computer equipment in extremes of temperature or humidity increases the failure rate of hardware components. To minimize the chance of component failure, use the server within the optimal temperature and humidity ranges. Electrical Power Good practice is to connect each power supply to a separate circuit, which enables the system to remain operational if one of the circuits fails. Consult your local electrical codes for any additional requirements. Ambient Temperature An ambient temperature range of 21°C (69.8°F) to 23°C (73.4°F) is optimal for system reliability. At 22°C (71.6°F) it is easy to maintain safe relative humidity levels. Operating in this temperatur...
Эта инструкция также подходит к моделям:Компьютеры - T2000 (1.62 mb)