Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
This is indicated by the CE marking (CE = Communaute Europeenne). 3.3 FCC class A device V Warning! This is class A product, which may cause radio interference in a domestic environment. If this is the case, the user may be required to take adequate measures. 3.4 Transporting the Server Blade V CAUTION! Only transport the server blade in its original packaging or in suitable packaging which protects it from knocks and jolts. For the Japanese market it is not required to transport the device in its original packaging. Do not unpack the server blade until it is at its installation location. 30 Operating Manual BX960 S1 Notes on installation in the system unit 3.5 Notes on installation in the system unit V CAUTION! Beware of the energy hazard at the midplane contacts of the system unit. A short circuit on these contacts may damage the system. 3.6 Environmental protection Environmentally-friendly product design and development This product has been designed in accordance with the Fujitsu standard for "environmentally friendly product design and development". This means that key factors such as durability, selection and labeling of materials, emissions, packaging, ease of dismantling and recycling have been taken into account. This saves resources and thus reduces the harm done to the environment. Further information can be found at: – (for the EMEA market) – (for the Japanese market) Energy-saving information Devices that do not need to be constantly switched on should be switched off until they are needed as well as during long breaks and after completion of work. Packaging information This packaging information doesn’t apply to the Japanese market. Do not throw away the packaging. You may need it later for transporting the system. If possible, the equipment should only be transported in its original packaging. Information on handling consumables Please dispose of printer consumables and batteries in accordance with the applicable national regulations. In accordance with EU directives, batteries must not be disposed of with unsorted domestic waste. They can be returned free of charge to the manufacturer, dealer or an authorized agent for recycling or disposal. BX960 S1 Operating Manual Environmental protection All batteries containing pollutants are marked with a symbol (a crossed-out garbage can). They are also marked with the chemical symbol for the heavy metal that causes them to be categorized as containing pollutants: Cd Cadmium Hg Mercury Pb Lead Labels on plastic casing parts Please avoid sticking your own labels on plastic parts wherever possible, since this makes it difficult to recycle them. Returns, recycling and disposal Please handle returns, recycling and disposal in accordance with local regulations. The device must not be disposed of with domestic waste. This device is labeled in compliance with European directive 2002/96/EC on waste electrical and electronic equipment (WEEE). This directive sets the framework for returning and recycling used equipment and is valid across the EU. When returning your used device, please use the return and collection systems available to you. Further information can be found at Details regarding the return and recycling of devices and consumables within Europe can also be found in the "Returning used devices" manual, via your local Fujitsu branch or from our recycling center in Paderborn: Fujitsu Technology Solutions Recycling Center D-33106 Paderborn Tel. +49 5251 525 1410 Fax +49 5251 525 32 1410 32 Operating Manual BX960 S1 Installing the hardware V CAUTION! . Follow the safety instructions in the chapter "Important notes" on page 23. . Do not expose the server to extreme environmental conditions (see "Ambient conditions" on page 19). Protect the server from dust, humidity and heat. . Make sure that the server is acclimatized for the time indicated in this table before putting it into operation. Temperature difference (°C) Minimum acclimatization time (hours) 5 3 10 5 15 7 20 8 25 9 30 10 Table 1: Acclimatization time In the table "Acclimatization time", the temperature difference refers to the difference between the operating environment temperature and the temperature to which the server was exposed previously (outside, transport or storage temperature). BX960 S1 Operating Manual Unpacking the server 4.1 Unpacking the server V CAUTION! Follow the safety instructions in "Safety instructions" on page 23. The server must always be lifted or carried by at least two people. (For the Japanese market, please refer to "...... ".) Do not unpack the server until it is at its installation location. E Transport the server to the place where you want to set it up. E Unpack all individual parts. Keep the original packaging in case you want to transport the server again (applies only to EMEA market). E Check the delivery for any damag...
Эта инструкция также подходит к моделям:Компьютеры - PRIMERGY BX960 S1 (1.1 mb)