Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
You can use the supplied RJ-45 crossover adapters with a standard RJ-45 cable to achieve the null modem configuration. FIGURE 2 Server Connections 4. (Optional) Connect an Ethernet cable between the server’s NET MGT port (FIGURE 2) and the network to which future connections to the SP and host will be made. After the initial configuration of the system using the SER MGT port, communication with the SP and host is usually performed through this Ethernet interface. 5. Connect an Ethernet cable between one of the server’s NET ports (FIGURE 2) and the network to which the server will communicate. SER MGT RJ-45 NET MGT RJ-45 Numbered cables correspond to setup steps. NET 0 to NET 3 RJ-45 SP to Ethernet (Optional) Host to Ethernet RJ-45 to DB-25 crossover adapter RJ-45 to DB-9 crossover adapter Terminal n device 6. 6. To provide redundancy, plug both power supplies into separate power sources. Note that the system can operate with only one power connection, but there is no redundancy in this case. When power is applied, the SP initializes and power supply LEDs illuminate. After a few minutes, the SP login prompt appears on the terminal device. Note that the host is not initialized or powered on yet. 7. At the terminal device, log in to the SP as root with a password of changeme. SUNSP00144FAC732F login: root Password: changeme . . . -> After a brief delay, the SP prompt is displayed (->). At this point, there are many commands you can perform using the Integrated Lights Out Manager interface. For example, to create a user named admin, and to set the admin account role to Administrator and the CLI mode to alom, enter: -> create /SP/users/admin role=Administrator cli_mode=alom Creating user... Enter new password: ******** Enter new password again: ******** Created /SP/users/admin Note that the asterisks in the example will not appear when you enter your password. In the future, when you log in to the admin account, you use the ALOM CMT compatibility command set. In the meantime, you are using the default ILOM command set. Additional SP information, such as how to change the password and how to set up the SP network parameters, is available in the online documentation set. 8. Power on the server and redirect the host output to display on the serial terminal device: -> start /SYS Are you sure you want to start /SYS (y/n)? y -> start /SP/console Are you sure you want to start /SP/CONSOLE (y/n)? y Serial console started. To stop, type #. . . . After you start the SP console, the server initialization takes approximately 20 minutes to complete. 9. When prompted, follow the onscreen instructions and enter the configuration information. Refer to TABLE 1 for the list of configuration information and your entries. You will be prompted to confirm the configuration several times, enabling confirmation and changes. If you are not sure how to respond to a particular value, you can accept the default, and make future changes when the Solaris OS is running. When the configuration menus are completed, the server reboots and displays the Solaris login prompt. 10. 10. The following commands provide information about the system: ¦ showrev – Displays the hostname and system architecture information. Use the -a option with this command to see the patches that are installed. ¦ psrinfo – Displays information about the number and status of the processors and cores in the host. Review the Solaris OS man pages and documentation for more details. Accessing Important Information for SPARC Enterprise Series Servers Before you deploy your server, check for the Product Notes for your server and other important information on the following websites. Global Site North American Site https://download.computers.us.fujitsu.com/ Japanese Site Accessing Documentation The following websites provide the latest versions of SPARC Enterprise Series manuals: Global Site North American Site https://download.computers.us.fujitsu.com/ Japanese Site Reader's Comments Regarding This Manual Reader's Comments Regarding This Manual Copyright 2008 Sun Microsystems, Inc. All rights reserved. FUJITSU LIMITED provided technical input and review on portions of this material. Copyright 2008 Sun Microsystems, Inc. Tous droits reserves. Entree et revue tecnical fournies par FUJITSU LIMITED sur des parties de ce materiel. Manual Code C120-E518-01XA Part No. 875-4395-10 May 2008, Revision A Manual Code C120-E518-01XA Part No. 875-4395-10 2008. 5. , Revision A ...
Эта инструкция также подходит к моделям:Компьютеры - SPARC T5120 (2.71 mb)