Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Компьютеры - HP ProLiant XL230a Gen9 Single-wide 2P 1.0m Rear-cabled Non-hot Plug Drives Compute Tray (129.91 kb)
Компьютеры - HP ProLiant XL230a Gen9 Single-wide 2P 1.0m Rear-cabled Non-hot Plug Drives Compute Tray (787.12 kb)
Фрагмент инструкции
Possible Values = Enabled [Enabled]
Disabled [Disabled]
Setting Type = Enum
Setting Name = F11BootMenu [One-Time Boot Menu (F11 Prompt)]
Current Value = Enabled [Enabled]
Possible Values = Enabled [Enabled]
Disabled [Disabled]
Setting Type = Enum
Setting Name = Sriov [SR-IOV]
Current Value = Enabled [Enabled]
Possible Values = Enabled [Enabled]
Disabled [Disabled]
Setting Type = Enum
Setting Name = ConsistentDevNaming [Consistent Device Naming]
Current Value = LomsOnly [CDN Support for LOMs Only]
Possible Values = LomsOnly [CDN Support for LOMs Only]
Disabled [Disabled]
Setting Type = Enum
Setting Name = NetworkBootRetry [Network Boot Retry Support]
Current Value = Enabled [Enabled]
Possible Values = Enabled [Enabled]
Disabled [Disabled]
Setting Type = Enum
Setting Name = BootOrderPolicy [Boot Order Policy]
Current Value = RetryIndefinitely [Retry Boot Order Indefinitely]
Possible Values = RetryIndefinitely [Retry Boot Order Indefinitely]
AttemptOnce [Attempt Boot Order Once]
ResetAfterFailed [Reset After Failed Boot Attempt]
Setting Type = Enum
Setting Name = VideoOptions [Video Options]
Current Value = BothVideoEnabled [Both Add-in and Embedded Video Enabled]
Possible Values = OptionalVideoOnly [Add-in Video Enabled, Embedded Video Disabled]
BothVideoEnabled [Both Add-in and Embedded Video Enabled]
Setting Type = Enum
Setting Name = UefiPxeBoot [UEFI PXE Boot Policy]
Current Value = Auto [Auto]
Possible Values = Auto [Auto]
IPv4ThenIPv6 [IPv4 then IPv6]
IPv4 [IPv4]
IPv6 [IPv6]
IPv6ThenIPv4 [IPv6 then IPv4]
Setting Type = Enum
Setting Name = EmbVideoConnection [Embedded Video Connection]
Current Value = Auto [Auto]
Possible Values = Auto [Auto]
AlwaysDisabled [Always Disabled]
AlwaysEnabled [Always Enabled]
Setting Type = Enum
Setting Name = PwrSupplyReqOverride [Power Supply Requirements Override]
Current Value = Default [Default Power Supply Requirements]
Possible Values = Default [Default Power Supply Requirements]
1Min2Redundant [Configure for 1 minimum required, 2 required for redundancy]
2Min3Redundant [Configure for 2 minimum required, 3 required for redundancy]
2Min4Redundant [Configure for 2 minimum required, 4 required for redundancy]
3Min4Redundant [Configure for 3 minimum required, 4 required for redundancy]
4MinNoneRedundant [Configure for 4 minimum required, no redundancy]
Setting Type = Enum
Setting Name = ThermalConfig [Thermal Configuration]
Current Value = OptimalCooling [Optimal Cooling]
Possible Values = OptimalCooling [Optimal Cooling]
IncreasedCooling [Increased Cooling]
MaxCooling [Maximum Cooling]
Setting Type = Enum
Setting Name = ThermalShutdown [Thermal Shutdown]
Current Value = Enabled [Enabled]
Possible Values = Enabled [Enabled]
Disabled [Disabled]
Setting Type = Enum
Setting Name = FanInstallReq [Fan Installation Requirements]
Current Value = EnableMessaging [Enable Messaging]
Possible Values = EnableMessaging [Enable Messaging]
DisableMessaging [Disable Messaging]
Setting Type = Enum
Setting Name = FanFailPolicy [Fan Failure Policy]
Current Value = Shutdown [Shutdown/Halt on Critical Fan Failures]
Possible Values = Shutdown [Shutdown/Halt on Critical Fan Failures]
Allow [Allow Operation with Critical Fan Failures]
Setting Type = Enum
Setting Name = HwPrefetcher [HW Prefetcher]
64
UEFI-Shell-Befehlsreferenz
...