|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
HP ProLiant BL620c G7 Server
Overview
Blade
The fol owing steps are necessary to instal a server blade:
Installation Instructions
1.
Instal and configure an HP BladeSystem c-Class enclosure.
2.
Install interconnect modules in the enclosure.
3.
Connect the interconnect modules to the network.
4.
Instal any server blade options.
5.
Instal a server blade.
6.
Assemble and instal full-height device bay blanks, as needed.
7.
Complete the server blade configuration.
For definitions of the acronyms used in this document, refer to
"Acronyms and abbreviations" in the server blade user guide.
Installing an HP BladeSystem c-
Class enclosure
Before performing any server blade-specific procedures, instal an
HP BladeSystem c-Class enclosure.
The most current documentation for server blades and other
HP BladeSystem components is available at the HP website
(http://www.hp.com/go/bladesystem/documentation).
Documentation is also available in the following locations:
•
Documentation CD that ships with the enclosure
•
HP Business Support Center website
(http://www.hp.com/support)
Preparing the enclosure
HP BladeSystem enclosures ship with device bay dividers to support
half-height devices. To install a full-height device, remove the blanks
and the corresponding device bay divider.
CAUTION: To prevent improper cooling and thermal
damage, do not operate the server blade or the
enclosure unless al hard drive and device bays are
populated with either a component or a blank.
1.
Remove the device bay blank.
© Copyright 2010 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Part Number 613850-001
2.
Remove the three adjacent blanks.
October 2010 (First Edition)
...