Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
HP LTO Media Handling Guide
Perform a Thorough Inspection
Inspect the cartridge's packaging to determine potential rough handling.
When inspecting a cartridge, open only the cartridge door. Do not open any
other part of the cartridge case. The upper and lower parts of the case are
held together with screws; separating them destroys the usefulness of the
cartridge. While the door is open check that the leader pin is properly seated.
Best practice is to open the door and check the pin is properly seated before
each use.
Inspect the cartridge for damage before using or storing it.
Inspect the rear of the cartridge (the part that you load first into the tape load
compartment) and ensure that there are no gaps in the seam of the cartridge
case. If there are gaps in the seam, the leader pin may be dislodged.
If you suspect that the cartridge has been mishandled but it appears useable,
copy any data onto a good cartridge immediately for possible data recovery.
Discard the mishandled cartridge.
Handle the Cartridge Carefully
Do not drop the cartridge. If the cartridge drops, slide the cartridge door back
and ensure that the leader pin is properly seated in the pin-retaining spring
clips.
Do not handle tape that is outside the cartridge. Handling the tape can
damage the tape's surface or edges, which may interfere with read or write
reliability. Pulling on tape that is outside the cartridge can damage the tape
and the brake mechanism in the cartridge.
Do not stack more than six cartridges.
Do not degauss a cartridge that you intend to reuse. Degaussing makes the
tape unusable.
6/22/2010
5 of 10
628389-001
...