Оценок - 0, средний балл: 0
(
)
|
К этому устройству также есть другие инструкции:
Компьютеры - HP Integrity NonStop J-Series (213.36 kb)
Компьютеры - HP Integrity NonStop J-Series (242.39 kb)
Компьютеры - HP Integrity NonStop J-Series (130.67 kb)
Фрагмент инструкции
Document Outline
- J06.18 Software Installation and Upgrade Guide
- Contents
- About This Document
- 1 Overview of Installing This RVU
- SUT on DVD
- CLIM Software for This RVU
- Disk Space Requirements
- Operational Differences Between This RVU and H-Series RVUs
- Investigating a J-Series RVU
- System Console Requirements
- Using OSM With This RVU
- Using DSM/SCM and NonStop Software Essentials With This RVU
- NonStop Software Essentials and This RVU
- DSM/SCM and This RVU
- DSM/SCM and Public DLLs
- DSM/SCM and OSS
- Upgrading the NonStop Software Essentials Client
- Upgrading the DSM/SCM Client (Planner Interface) and the T6031H02 PVU
- Summary of Software Installation Tasks
- Check or Alter the CONFTEXT File Before Installing This RVU SUT
- Installing CLIM Software
- Backing Out the DSM/SCM Revision
- Managing Microcode and Firmware
- Installation, Migration, and Fallback
- Perform an RVU Upgrade on a Node
- 2 Managing Microcode and Firmware
- Managing BladeCluster Software and Firmware Requirements
- Managing ME Firmware and ME FPGA Firmware
- Managing OA Firmware for the c7000 Enclosure
- Managing Server Blade Firmware and Blade Element Firmware
- Managing ServerNet Adapter Firmware
- Managing SWAN and SWAN 2 Concentrator Firmware
- Managing NonStop Cluster Switch Firmware
- Managing CLIM Firmware
- Managing S-Series Interoperability Firmware
- 3 Installation, Migration, and Fallback Considerations for This RVU
- J06.04
- J06.05
- J06.06
- J06.07
- J06.08
- J06.09
- J06.10
- J06.11
- J06.12
- J06.13
- Safeguard
- Considerations for Fallback to J06.11
- Performance Tuning Requirements
- Migrating a NonStop BladeSystem NB50000c to an NB54000c or NB50000c-cg to an NB54000c-cg
- Upgrading a NonStop BladeSystem NB54000c or NB54000c-cg to J06.13 or Later RVUs
- HP NonStop Software Essentials
- IB CLIM Fallback Considerations
- EXTDECSL
- TNS/E ECOBOL
- J06.14
- J06.15
- J06.16
- Capacity Planning
- Carrier Grade Gen8 CLIMs
- CLIM Authlog
- HP c7000 Enclosure Updates
- HP Integrity NonStop BladeSystems NB56000c and NB56000c-cg
- HP-UX ODBC/MX Client Driver
- NonStop SOAP 4.2
- OSM Enhancements
- Open System Services (OSS) Enhancements
- Safeguard V5R2 Enhancements
- Spooler FASTP Network Print Process
- SSL Encryption Support
- Unicode Applications Support
- XYGATE Merged Audit
- XYGATE Use Authentication
- J06.17
- J06.18
- 4 Upgrade Checklist
- 5 Preparing to Upgrade the Server Software (Preinstallation Tasks)
- Back Up Important Files
- Record the Current SYSnn
- Save the Current Configuration File (CONFxxyy)
- Verify System Processes
- Check Processor Status
- Check System Components
- Verify the State of the Internal ServerNet Fabric
- Verify Firmware
- Verify Critical System Processes
- Verify Disk Drives
- Verify Tape Drives (If Necessary)
- Verify That the CLIMs Are in the Started State
- Verify That the CIP Providers Are in the Started State
- Check the Status of the Spooler Collector
- Check for Sufficient Swap File Space
- Install Node Interoperability SPRs
- Back Up System Information
- For NonStop BladeSystems NB54000c, NB54000c-cg, NB56000c, and NB56000c-cg, Ensure the Core License File is Ready for Migration
- If Necessary, Manually Install the NonStop Software Essentials Server Product
- 6 Installing a SUT for This RVU Using NonStop Software Essentials
- 7 Installing a SUT for This RVU Using the Planner Interface
- 8 Running ZPHIRNM
- 9 Loading This RVU
- Alerts
- Perform Updates
- 1. Before Halting the Processors
- 2. Halt the Processors
- 3. (Conditional): Update the System Firmware
- 4. (Conditional): Update the HSS Firmware
- 5. (Required Only for Upgrade from J06.13 or Earlier to J06.14 or Later) Perform a Hard Reset
- 6. Upgrade the CLIM Software
- 7. (Optional) Update the CLIM Firmware
- 8. Loading the System
- 10 Resuming Normal Operations
- Revive the Down Half of the Mirrored Disk
- Your Core License
- Start System Applications
- Run merge_whatis
- Configure Specific Products (Post-System Load)
- 11 Backing Out the DSM/SCM Revision
- 12 Running ZPHIRNM to Reactivate the Previous Software Revision
- 13 Falling Back on the CLIMs, Loading the Previous RVU, and Resuming Normal Operations
- Fallback Considerations for the Power Regulator
- Alerts
- Task Overview
- Before Halting the Processors
- Halt the Processors
- While the Processors Are Halted
- Prepare the CLIMs
- Load the System
- Using the SSOCLIM * Option to Run SSOCLIM on All Available CLIMs
- Complete CLIM Setup
- Revert Firmware (If Necessary)
- Install Specific OSS Files (If Necessary)
- Verify That the System Is Started
- A Using DSM/SCM With NonStop Software Essentials to Install SPRs
- B Using DSM/SCM With the Planner Interface to Install SPRs
- C Copying the DSM/SCM, NonStop Software Essentials, and SWID SPRs from the SUT Using NonStop Software Essentials
- Alerts
- Copy (RESTORE) the DSM/SCM Server, NonStop Software Essentials Server, and SWID Product Versions from the SUT to Disk
- Receive the H02 DSM/SCM, NonStop Software Essentials Server, and SWID SPRs
- Create a New Software Revision for H02 DSM/SCM, NonStop Software Essentials, and SWID SPRs
- Build and Apply the DSM/SCM H02 Software Product Revision
- Run the INSTALL^TEMPLATES Macro
- If Migrating to J06.12 or an Earlier RVU, Install the Latest NonStop Software Essentials Server SPR Using Scout
- Restart Applications
- Recovery for Problems While Installing the H02 Version of DSM/SCM
- Install the Latest Version of the NonStop Software Essentials Client
- D Copying the DSM/SCM and SWID SPRs from the SUT Using the Planner Interface
- Alerts
- Copy (RESTORE) the H02 DSM/SCM Product Version to Disk (If Necessary)
- Receive the H02 SWID and DSM/SCM SPRs
- Create a New Software Revision for H02 DSM/SCM and SWID SPRs
- Build and Apply the DSM/SCM H02 Software Product Revision
- Rename the Applied DSM/SCM H02 Files By Running ZPHIRNM
- Run the INSTALL^TEMPLATES Macro
- Restart Applications
- Recovery for Problems While Installing the H02 Version of DSM/SCM
- Install the DSM/SCM Client From ZDSMSCM
- E Updating SWAN Concentrator CLIP Firmware
- Acronyms
- Index