Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации HP, модель HP c8000 Workstation

Производитель: HP
Размер: 998.58 kb
Название файла:

Язык инструкции:en

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста


К этому устройству также есть другие инструкции:

Фрагмент инструкции





















About this device
Required tools
2.
Slide the mid-weight inner slides toward the rear of the server
until they lock into place.
HP Mid-Weight Slide Kit
The following tools are required for installation:
The HP Mid-Weight Slide Kit (5069-6371) enables you to install HP

T-25 Torx driver
(5069-6371)
2U, 3U, 4U, and 5U servers into HP round-hole, square-hole,

Phillips screwdriver
threaded-hole, and early HP racks.

Installation Instructions

Flathead screwdriver
Kit contents

M10 socket


Mid-weight slide-mounting alignment tool (included with this kit)
If any of the following items are missing or damaged, contact your





HP authorized reseller. The following hardware pieces are included
Rack warning

in this kit.


Quantity Description
Picture
WARNING: To reduce the risk of personal injury or
damage to the equipment, be sure that:
1
Cable management arm (J1539-63003)

• The leveling feet are extended to the floor.
2
Mid-weight inner slides (J1539-63001)
• The full weight of the rack rests on the leveling feet.

• The stabilizing feet are attached to the rack if it is a


2
Mid-weight outer slide assemblies (J1539-
single-rack installation.
Marking your rack columns using the mid-weight
63002)

• The racks are coupled together in multiple-rack
slide-mounting alignment tool
2
Hook-and-loop straps (1400-2030)
installations.


• Only one component is extended at a time. A rack
1.
Using the height of the mid-weight inner slides, mark both sides
1
Mid-weight slide-mounting alignment tool
may become unstable if more than one component is
of the mid-weight slide-mounting alignment tool.
(5185-6098)

extended for any reason.



Hardware kit contents


Mid-weight slides overview
Quantity Description
Picture
2
M5 x 30-mm screw (0515-2992)
Perform one of the following:


Install the mid-weight slides in a rack ("Installing the mid-weight
1
M5 x 10-mm screw (5021-2991)
slides in a rack" on page 1).

-or-
2
M5 x 16-mm screw (0515-3019)

Ship a rack with an integrated server ("Shipping a rack with an

integrated server" on page 3).

4
M4 x 8-mm screw (0515-2478)
Installing the mid-weight slides in a rack

2
M5 barrel nut (5065-7210)
1.
Install the mid-weight inner slides ("Installing the mid-weight
inner slides" on page 1).



2.
Mark your rack columns using the mid-weight slide-mounting
2.
Using the marked mid-weight slide-mounting alignment tool,
1
Tie-down bracket (5069-6357)
alignment tool ("Marking your rack columns using the mid-
mark the front and rear columns of the rack.

weight slide-mounting alignment tool" on page 1).


3.
Follow the appropriate installation procedure for your
Optional hardware kit contents (J1539-63004)
rack type:
The optional hardware kit is required to install the mid-weight slide
o Installing the mid-weight slides in round-hole or square-hole
kit into early HP racks.
racks (on page 2)

Quantity Description
Picture
o Installing the mid-weight slides in threaded-hole racks
(on page 2)
4
M5 x 16-mm screw (0515-3019)
o

Installing the mid-weight slides in early HP racks
© Copyright 2006, 2008 Hewlett-Packard Development Company, L.P.
2
M6 flathead screw (5185-6036)
o (on page 2)
The information contained herein is subject to change without notice. The

4.
(Optional) Adjust the mid-weight outer slide assemblies
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
2
Front bracket (5184-2312)
("(Optional) Adjusting the mid-weight outer slide assemblies"
herein should be construed as constituting an additional warranty. HP shall

on page 3).



not be liable for technical or editorial errors or omissions contained herein.
Installing the mid-weight inner slides


1.
Align the mid-weight inner slide holes with the tabs on
Item Description
the server.
Part Number 416755-003
1
Mark for HP 5U servers
March 2008 (Third Edition)
2
Mark for HP 4U servers
Printed in the US
416755- 003

3
Mark for HP 2U and HP 3U servers



...

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории