Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Document Outline
- vPro Setup and Configuration for the dc7700 Business PC with Intel vPro Technology
- Introduction
- AMT Setup and Configuration
- AMT System Phases
- SMB Mode - AMT Setup and Configuration with MEBx
- SMB Mode - AMT Setup and Configuration Steps
- 1. Press Ctrl-P during POST to enter Manageability Engine BIOS Extension (MEBx) Setup. You can dis play this option only during POST if set in F10-Setup.
- 2. Type the default password, which is admin. Passwords are case-sensitive.
- 3. Change the MEBx password. The new password must meet the Strong Password criteria defined in the Password Guidelines Section. Type the password twice for verification.
- 4. Select the Intel ME Platform Configuration. A window displays indicating that the system resets after configuration.
- 5. Select Y. ME platform configuration allows IT personnel to configure ME features such as AMT/ASF selection, power options, firmware update capabilities, and so on.
- 6. Select Intel ME State Control, and then select Enabled.
- 7. Select Intel ME Firmware Local Update Qualifier, and then select Always Open.
- 8. Skip LAN Controller.
- 9. Select Intel ME Features Control.
- 10. Select Intel ME Power Control.
- 11. Return to previous menu to exit the MEBx Setup and save AMT configuration. The system will display an Intel ME Configuration Complete message and reboot.
- 12. Press Ctrl-P during POST to enter MEBx Setup again.
- 13. Type the MEBx password.
- 14. Select Intel AMT Configuration.
- 15. Select Host Name, and then type a host name.
- 16. Select TCP/IP.
- 17. Skip Provisioning Server.
- 18. Select Provision Model.
- 19. Skip Un-Provision. This option returns the system to factory defaults. See ...Эта инструкция также подходит к моделям:
Компьютеры - HP dc72 Blade Workstation Client (430.45 kb)
- AMT Setup and Configuration