Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
1. Select Start > Turn Off Computer > Restart. 2. When the logo screen appears, press esc to display the Boot menu. 3. Use the arrow keys to select the boot device, then press enter. If you want to boot from a specific device whenever it is present, change the boot order using the BIOS Setup utility. See “Configuring Your Notebook” in the “Troubleshooting” chapter in this guide. To Use the TouchPad The TouchPad includes an on-off button so you can turn off the TouchPad to avoid moving the pointer accidentally when you are typing. The indicator light turns off when you turn off the TouchPad. This is a graphic illustrating how to Use the TouchPad. The following table describes the external components of the TouchPad identified in the previous illustration. 1 Click buttons. The Click buttons work like the left and right buttons on a standard mouse 2 TouchPad (touch-sensitive pointing device). 3 TouchPad on-off button and indicator light. 4 Scroll pad. The scroll pad scrolls vertically to display the contents of the active window. To Use the Function Hot Keys This graphic illustrates the Function Key. The combination of the Fn key plus another key creates a hot key—a shortcut key sequence—for various system controls. To use a hot key, press and hold Fn, press the appropriate second key, then release both keys. The following table describes the different combination of the function keys. This hot key Does this Fn+F1 Decreases the display brightness. Fn+F2 Increases the display brightness. Fn+F8 Toggles the built-in keypad on and off. Does not affect an external keyboard. If Num Lock is on, then the numeric functions are active; otherwise, cursor control is active (as marked on an external keyboard). Fn+F12 Initiates Hibernation. Fn+NumLock Toggles Scroll Lock on and off. Fn+Page Up Increases the audio volume and cancels the mute setting. Fn+Page Down Decreases the audio volume. Fn+Backspace Mutes/unmutes the audio output. Using CDs or DVDs To Play DVD Movies If your notebook is equipped with a DVD or other DVD readable drive, it also includes DVD player software that lets you play DVD movies. NOTE: DVDs can have regional codes embedded in the disc data. These codes prevent DVD movies from being played outside the region of the world in which they are sold. If you get a region code error, you are trying to play a DVD intended for a different region. Most DVD drives let you change the region code only a limited number of times (usually no more than 4). When you reach this limit, your last change to the region code will be hard-coded on the DVD drive and will be permanent. Your warranty does not cover the expense of correcting this situation. Refer to the Help for your DVD player software for details about setting region codes. To Connect a TV to Your Notebook You can use a TV as an external monitor for your notebook. To connect a TV to your notebook: 1. Plug a standard 4-pin S-Video cable to the S-Video out jack on your notebook (yellow connector on the back panel). Plug the other end of the cable to the S-Video in jack on your television. Restart your notebook. NOTE: Although your notebook has a 7-pin S-Video out jack, the notebook accepts either a 7-pin or 4-pin cable connection. 2. Select Start > Control Panel > Appearance and Themes > Display. Then, select Settings tab > Advanced button > Display tab. 3. To enable the TV, select the red button next to TV. NOTE: If the S-Video cable is not plugged into your notebook and TV, the red button will not be displayed. 4. Select Apply to accept the changes. 5. If you are prompted to restart Windows, select Yes. To Connect an Infrared Device (Select Models Only) NOTE: Select models include an infrared port. By default, the infrared port is not enabled, so you must first enable it before you can use it. If your model has an infrared port (a small, rectangular lens located on the front of the notebook), then your notebook can communicate wirelessly with other infrared devices, such as printers or other notebooks, using this port. Using the Infrared Port Make sure the infrared port of your notebook and the infrared port of the device with which you want to communicate lie in a straight line facing each other. The 2 ports should be no more than 3 feet (1 meter) apart with no obstructions in between. Noise from nearby equipment can cause transmission errors. 1. Select Start > Control Panel > Performance and Maintenance > System. 2. Select the Hardware tab > Device Manager button > ALI fast infrared controller > Enable Device button. 3. Select Next > Finish > Close. Then close all open dialog boxes. To check the status of communications, open Wireless Link by selecting Start > Control Panel > Printers & Other Hardware > Wireless Link. Printing to an Infrared Printer Install your printer and assign it to the notebook infrared port. You can then print from your applications or by following the directions for infrared ports. Transferring Files Through an Infrared Connection You ...
Эта инструкция также подходит к моделям:Компьютеры - 319921-001 (1.73 mb)