Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
64 ThinkServer TD330 User Guide When working with the LSI Software RAID Configuration Utility program, you must use the keyboard. The keys used to perform various tasks are displayed on the bottom of each screen. Use up and down arrow keys to navigate between items. For most items, the corresponding help message is displayed on the bottom of the screen when the item is selected. If the item has submenus, you can display the submenus by pressing Enter. After entering the LSI Software RAID Configuration Utility program, you can see the Management Menu on the screen. The Management Menu contains the following menu items: • Configure This menu contains items to help you create a RAID array, view the current RAID configuration, add a new RAID array, delete an existing RAID array, and select a boot virtual drive. • Initialize This menu helps you initialize virtual drives. Note: Initializing a virtual drive erases all data on the virtual drive. Back up any data you want to keep and ensure that the operating system is not installed on the virtual drive before the initialization. • Objects This menu helps you configure parameters for the RAID controller, the virtual drives, and the physical drives. • Rebuild This menu helps you rebuild a physical drive in a RAID array in the event of a physical drive failure. You can choose to rebuild the data on the failing drive if the drive is still operational. If the drive is not operational, it must be replaced and the data on the failing drive must be rebuilt on a new drive to restore the system to fault tolerance. If hot-spare drives are available, the failing drive might be rebuilt automatically without any user intervention. • Check Consistency This menu helps you do consistency check for the virtual drives. The consistency check verifies the correctness of the data on virtual drives that use RAID 1, 5, and 10. The following table shows the various menus and items in the LSI Software RAID Configuration Utility program. On each menu, press the Enter key to show selectable options and select a desired option by using up and down arrow keys or type desired values from the keyboard directly. Table 1. LSI Software RAID Configuration Utility program menu items Menu item Submenu item Comments Configure Easy Configuration Create physical arrays. An array will automatically become a virtual drive. New Configuration Clear the existing configuration and start a new configuration. View/Add Configuration View the existing configuration or add a new configuration. Clear Configuration Clear the existing configuration. Select Boot Drive Select a boot virtual drive. Initialize Varies by configuration. Initialize virtual drives. Chapter 5. Configuring the server 65 Table 1. LSI Software RAID Configuration Utility program menu items (continued) Menu item Submenu item Comments Objects Adapter Set adapter-related parameters, such as rebuild rate, consistency check rate, and so on. Virtual Drive Set virtual drive parameters. Physical Drive Set physical drive parameters, such as creating a hot-spare drive for the virtual drive, making a failing drive as online, changing a drive state, and viewing the specifications of a physical drive. Rebuild Varies by configuration. Rebuild physical drives. Check Consistency Varies by configuration. Check consistency of virtual drives. Creating, adding, or deleting a RAID array This topic provides instructions on how to create, add, or delete a RAID array using the LSI Software RAID Configuration Utility program. Note: Before you create a RAID array using the LSI Software RAID Configuration Utility program, ensure that the server meets the required hardware configuration. For example, the server needs to have the required number of hard disk drives installed and connected to the system board. See “About RAID” on page 62 for information about the required number of hard disk drives for each RAID level. If you want to create a RAID 5 array using the LSI Software RAID Configuration Utility program, the server also needs to have a ThinkServer RAID 100 or RAID 300 Upgrade Key for Advanced RAID. See “Installing or removing the ThinkServer RAID 100 or RAID 300 upgrade key for Advanced RAID” on page 104. To create, add, or delete a RAID array using the LSI Software RAID Configuration Utility program, do the following: 1. Start the LSI Software RAID Configuration Utility program. See “Starting the LSI Software RAID Configuration Utility program” on page 64. 2. On the main interface of the program, do one of the following depending on your needs: • If you want to create a RAID array, select Easy Configuration, and then follow the instructions on the screen. • If you want to add a secondary RAID array (if supported by your server), select View/Add Configuration, and then follow the instructions on the screen to view the current configuration and add a new RAID array. • If you want to delete the existing RAID array, exit the program and back up all your data on the hard d...
Эта инструкция также подходит к моделям:Компьютеры - ThinkServer TD330 (0443) (13.45 mb)
Компьютеры - ThinkServer TD330 (1256) (13.45 mb)
Компьютеры - ThinkServer TD330 (1261) (13.45 mb)
Компьютеры - ThinkServer TD330 (1276) (13.45 mb)