Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Gigabyte, модель GS-A22C0

Производитель: Gigabyte
Размер: 23.27 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


3. Insert the replacement power supply firmly into the chassis. Connect the AC power cord to the replacement power supply. 2-7 Replacing the Power Supply CAUTION! • In order to reduce the risk of injury from electric shock, disconnect AC power from the power supply before removing it from the system. 1 2 - 27 - Hardware Installation Chapter 3 System Appearance 3-1 Front View No. Decription 1. Power button 2. Reset button 3. RJ-45 LAN ports 4. USB 2.0 ports 5. Serial port 6. Front panel LEDs 7. LAN modules cover door 2 1 6 5 4 3 7 3-2 Rear View No. Decription 1. Power Supply fan 2. Power cord 3. System fan 2 1 3 3-3 Front Panel LED and Buttons 1 No. Name Color Status Description 1. HDD Activity LED Green Solid On HDD access N/A Off No HDD access 2. Power LED Green Solid On System is powered on. Green Blink System is in ACPI S1 state (sleep mode) N/A Off • System is not powered on or in ACPI S5 state (power off) • System is in ACPI S4 state (hibernate mode) 2 - 28 - 29 - Hardware Installation Chapter 4 Motherboard Components 4-1 GA-7CPCP Motherboard Components Item Code Description 1 PCIE_4 PCI-E slot 4 (x8 slot) 2 SYS_FAN1 System fan connector #1 3 S3_MASK S3 Power On Select jumper 4 SYS_FAN2 System fan connector #2 5 SYS_FAN3 System fan connector #3 6 SATA_DOM1 SATA port 1 DOM support jumper 7 SYS_FAN4 System fan connector #4 8 SATA1/SATA0 SATA 3Gb/s connectors (SATA1/Left; SATA0/Right) 1 2 3 5 6 7 8 9 4 10 11 12 13 14 17 18 19 20 21 22 23 24 30 25 32 31 26 28 27 29 33 34 36 35 37 38 39 40 41 42 43 44 45 46 47 48 49 53 50 52 51 54 15 16 9 SATA _DOM0 SATA port 0 DOM support jumper IN _VGA1 VGA header 11 LAN2 LAN2 port 12 L AN1 L AN1 por t 13 IO_1 Front IO Bridge board header 14 ATX1 24 pin main power connector 15 USB2 USB 2.0 header 16 PWR _DET1 PMBus connector 17 P12V_ AUX2 8 pin power connector (For secondary CPU) 18 P12V_ AUX1 8 pin power connector (For primary CPU) 19 DDR3_P0_C0 Channel 3 slot (for primary CPU) DDR3_P0_D0 Channel 4 slot (for primary CPU) 21 HDD_ LED1 HDD LED header 22 F_PANEL1 Front panel header 23 CPU0 Intel LGA2011 socket (Primary CPU) 24 PCIE_SW PCI Express Switch jumper 25 PCIE_1 PCI-E slot 1 (x16 slot/Proprietary) 26 DDR3_P0_B0 Channel 2 slot (for primary CPU) 27 DDR3_P0_ A0 Channel 1 slot (for primary CPU) 28 DDR3_P1_G0 Channel 3 (for secondary CPU) 29 DDR3_P1_H0 Channel 4 (for secondary CPU) PCIE_2 PCI-E slot 2 (x16 slot/Proprietary) 31 PCIE_3 PCI-E slot 3 (x16 slot/Proprietary) 32 CPU1 Intel LGA2011 socket (Secondary CPU) 33 DDR3_P1_F0 Channel 1 (for secondary CPU) 34 DDR3_P1_E0 Channel 1 (for secondary CPU) 35 USB1 USB 2.0 header 36 CPU1_FAN CPU fan connector (for secondary CPU) 37 TPM _1 TPM module connector 38 COM2 Front serial port header 39 KB_MS1 Keyboard/Mouse header GPIO1 GPIO header 41 CASE_OPEN Chassis intrusion header 42 BMC_FRB Force to Stop FRB Timer jumper 43 BIOS_RCVR BIOS recovery jumper 44 CF_CON1 CF connector 45 BAT Battery socket 46 CLR_CMOS Clear CMOS jumper 47 BIOS_WP BIOS write protect jumper 48 BMC BMC Upgrade ROM 49 BIOS BIOS Upgrade ROM U56 iTE IT8728F Super IO controller 51 U45 ASPEED AST2300 BMC controller 52 LED_BMC 53 CPU0_FAN 54 ME_RVCR BMC firmware readiness LED On: BMC frmware is initial Blinking: BMC frmware is ready Off: System is powered off CPU fan connector (for primary CPU) ME recovery jumper Hardware Installation - 32 - 4-2 Jumper Setting No. Jumper Code Jumper Setting 1. CLR_CMOS (Clearing CMOS Jumper) 1-2 Close: Normal operation (Default setting) 2-3 Close: Clear CMOS data 2. ME_RVCR (ME recovery Jumper) 1-2 Close: ME recovery mode. 2-3 Close: Normal operation. (Default setting) 3. BIOS_WP (BIOS Write Protect Jumper) 1-2 Close: Normal operation. (Default setting) 2-3 Close: Enable BIOS write protect function. 4. BMC_FRB (Force to Stop FRB Timer Jumper) 1-2 Close: Normal operation (Default setting) 2-3 Close: Force to Stop FRB Timer. 5. BIOS_RCVR (BIOS Recovery Jumper) 1-2 Close: Normal operation (Default setting) 2-3 Close: BIOS recovery mode. 6. CASE_OPEN (Case open intrusion Jumper) Open: Normal operation Close: Active chassis intrusion alert. 7 8 9 10 6 5 1 2 3 4 7. S3_MASK (S3 Power On Select Jumper) 1-2 Close: Stop an initial power on when BMC is not ready. 2-3 Close: Keep initial power on. (Default setting) 8. SATA _ DOM1 (SATA port 1 DOM support jumper) Pin No. Definition 1 P5V 2 SATA_DOM_1 3 GND 9. SATA _ DOM0 (SATA port 0 DOM support jumper) Pin No. Definition 1 P5V 2 SATA_DOM_0 3 GND 10. PCIE_SW (PCI Express Slot Switch jumper) 1-2 Close: TBD 2-3 Close: TBD (Default setting) 7. S3_MASK (S3 Power On Select Jumper) 1-2 Close: Stop an initial power on when BMC is not ready. 2-3 Close: Keep initial power on. (Default setting) 8. SATA _ DOM1 (SATA port 1 DOM support jumper) Pin No. Definition 1 P5V 2 SATA_DOM_1 3 GND 9. SATA _ DOM0 (SATA port 0 DOM support jumper) Pin No. Definition 1 P5V 2 SATA_DOM_0 3 GND 10. PCIE_SW (PCI Express Slot Switch jumper) 1-2 Close: TBD 2-3 Close: TBD (Default setting) - 33 4-3 System Block Diagram Propri...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории