Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Such discs may break at high speed rotation. If full care is not exercised in relation to this matter you may void the warranty to this product. . . .: .......... . ............ , ...... ....... . ....... , .................. ...,.......... . .............. .. ... .............. .... ......................... ..... .......... ........................ ............ ........... V. Installing the System / ...... / ........... 1. Remove the screws of both side covers of the chassis, push backward to dismount the covers. ............,........... ........... .... 2 ......................... 2. Remove 3 screws of the disc drive chassis and dismount chassis. ......... 3 ...,......... ........... . 3 . .......................... 3. Memory / ... / . .. . There are fixing grooves on both sides / . ...... / ........ ...... . Make sure the direction of the foolproof groove must be the same as that of the memory slot on the motherboard. The hooks must be fixed into the grooves before the installation is considered complete. ............. , ..................... . ....... .....,.......... .................... ................. . ..... ....... ................. . ............... ... ................................... . 4- 4. Connect the connector of the power supply to the power supply socket of the hard disk drive and floppy disk drive / option device. When you finished, align the disc drive chassis back with screws. Follow above note. ...................... / ................., .................................... . HDD . ... / FDD .... / ................................................................. . Fix the HDD cable to HDDFix the FDD cable to FDDFix the ODD cable to ODD ........... ........... ........... HDD . ... . HDD .. FDD .... . FDD ... ............. ... . .. . ....... . 5. CPU / ..... / CPU 5- 1. Evenly spread the heat dispersion paste on the CPU and make sure it totally covers the CPU. Insert the CPU on the CPU socket. Make sure that you have lifted the transversal lever and aligned the aslant side of the CPU along the aslant side of the CPU socket. ......... CPU ., ........ CPU .. CPU . ..... . CPU ... ........,.. CPU . ... CPU . ........ ........ . CPU . .... .... . CPU ............ ..... .... ............... . CPU .... . CPU . .......... ......... CPU ....... . . CPU . .......... . 4. HDD / FDD / ODD Installation / ..... / ... / ..... HDD / FDD / ......... . 4- 1. There are four 3.5” drive bays in the disc drive chassis. The left 2 bays are for FDD, and the right 2 bays are for HDD. Select a place and fix the HDD / FDD with screws.......... 4 . 3.5” . .... . ........... , ......... .............. / ........,............ ............. . 4 . . 3.5” . ........... .. . 2 .... . FDD .. .. . 2 .... . HDD .... ........ HDD/ FDD ........ ..... ... . Put HDD into the Put FDD into the Align the screws at disc drive chassis disc drive chassis the screw holes ............ ............ .... HDD . ......... FDD . ......... ....... . .... .. . ...... . • Note: Bay .. and .. are for FDD. Bay .. and .. are for HDD. ..: .. . .. ......... .. . .. ......... .. : .. . .. .. . FDD .. . .. . .. .. . HDD .. . A. For LGA 775 processors / .. LGA 775 .. . / LGA 775 ......... . Evenly spread the heat dispersion paste on the CPU / . ........ CPU . / Lift the transversal lever / . ... / ........ . CPU . ....... . ........... . B. For Socket 478 processors / .. Socket 478 ... / Socket 478 ...... ... . CPU Pin Lift the transversal lever / . .. . / ..... . Evenly spread the heat dispersion paste on ..... . the CPU / ......... CPU . / ........ . CPU ........ . C. For AMD K7 processors / .. AMD K7 ... / AMD K7 ......... . Lift the transversal lever / .... / .......... . Evenly spread the heat dispersion paste on the CPU / ......... CPU . / ........ . CPU ........ . 4- 2. Put the ODD (DVD-ROM / CD-ROM) into the rack of front panel, align the screws at the screw holes of the rack. ......... (DVD-ROM / CD-ROM) ........ , ........... .... ......... (DVD-ROM / CD-ROM) . ........... ........ .......... ........ . 4-3. Take out the IDE / FDD bus cables bundled in the accessory kit. Connect the black connector to the hard disk drive and floppy disk drive / option devices, and to the corresponding locations in the motherboard. Align the first pin of the red cable to Pin 1 labeled on the hard disk and floppy disk / option devices, also to Pin 1 labeled on the corresponding locations in the motherboard. ....... IDE . .... , ...................... / ... ..,....................... .... .......... .... / ......... 1 ...,............. 1 .... ........ . IDE / FDD . ........... ............. . HDD . ... / FDD .... / ...... ................... .... .... . . . ........... HDD .... / FDD .... / ... .. . 1 ....................... . 1 ........... ........................ (........ ) D. For AMD K8 processors / .. AMD K8 ... / AMD K8 ......... . Lift the transversal lever / .... / .......... . Evenly spread the heat dispersion paste on the CPU / ......... CPU ....