Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Lenovo, модель ThinkCentre M93z (10AC)

Производитель: Lenovo
Размер: 5.73 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


• Prevent others from touching the parts and other computer components. • Before you replace a new part, touch the static-protective package containing the part to a metal expansion-slot cover or other unpainted metal surface on the computer for at least two seconds. This reduces static electricity from the package and your body. • When possible, remove the new part from the static-protective packaging, and install it directly in the computer without setting the part down. When this is not possible, place the static-protective package that the part came in on a smooth, level surface and place the part on it. • Do not place the part on the computer cover or other metal surface. Installing or replacing hardware This section provides instructions on how to install or replace hardware for your computer. You can expand the capabilities of your computer and maintain your computer by installing or replacing hardware. Attention: Do not open your computer or attempt any repair before reading and understanding “Important safety information” on page v. Notes: 1. Use only computer parts provided by Lenovo. 2. When installing or replacing an option, use the appropriate instructions in this section along with the instructions that come with the option. Installing external options You can connect external options to your computer, such as external speakers, a printer, or a scanner. For some external options, you must install additional software in addition to making the physical connection. When installing an external option, see “Locating connectors, controls, and indicators on the front of your computer” on page 10 and “Locating connectors on the rear of your computer” on page 13 to identify the required connector. Then, use the instructions that come with the option to help you make the connection and install any software or device drivers that are required for the option. © Copyright Lenovo 2013 Removing and reinstalling the monitor stand Attention: Do not open your computer or attempt any repair before reading and understanding “Important safety information” on page v. This section provides instructions on how to remove and reinstall the monitor stand. Note: The frame stand is available only in some models. CAUTION: Turn off the computer and wait three to five minutes to let the computer cool before removing the monitor stand. To remove and reinstall the monitor stand, do the following: 1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer. 2. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay it down so that the screen is against the surface and the cover is facing up. 3. Remove the four screws that secure the monitor stand, and then remove the monitor stand from the computer. Figure 11. Removing the monitor stand 4. To reinstall the monitor stand, align the four screw holes with the corresponding holes in the chassis, and then install the four screws to secure the monitor stand to the computer. 36 ThinkCentre M93z User Guide Figure 12. Reinstalling the monitor stand What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to “Completing the parts replacement” on page 69. Installing the monitor stand Attention: Do not open your computer or attempt any repair before reading and understanding “Important safety information” on page v. This section provides instructions on how to install the monitor stand. Note: The monitor stand is available only in some models. To install the monitor stand, do the following: 1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the computer. 2. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay it down so that the screen is against the surface and the cover is facing up. Chapter 5. Installing or replacing hardware 37 3. If your computer is installed with a frame stand, press the release button toward the top of the computer and lift the frame stand off the computer. Figure 13. Removing the frame stand 38 ThinkCentre M93z User Guide 4. To install the monitor stand, align the two clips on the top of the monitor stand with the two holes in the chassis, and then press the release button toward the top of the computer until the monitor stand is secured in position. Figure 14. Installing the monitor stand Chapter 5. Installing or replacing hardware 39 5. After installing the monitor stand, pull up the computer to the vertical position and remove the monitor stand lock to adjust the height of the monitor stand. The monitor stand has a height adjustment range of 110 millimeters (4.33 inches). Figure 15. Removing the m...

Эта инструкция также подходит к моделям:
Компьютеры - ThinkCentre M93z (10AD) (5.73 mb)
Компьютеры - ThinkCentre M93z (10AE) (5.73 mb)
Компьютеры - ThinkCentre M93z (10AF) (5.73 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории