Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
To remove the computer cover 1 Turn off your computer and unplug all cables. 2 Place your computer on a flat, steady surface. If your computer is in the vertical position, rotate the plastic stabilizers and lay your computer on its side. 3 Turn the screws counterclockwise to release the cover. 4 Hold the sides of the cover with both hands. 5 Slide it back about an inch and then gently lift it upward to detach it. To replace the computer cover 1 Align the cover's hinges to the housing frame; then gently push it in to slide it back into place. 2 Secure the cover with the screws. Upgrading your computer Certain components of your computer are upgradeable, such as the memory, the hard disk, the CPU and the expansion cards. You need to observe the "Installation precautions" on page 10 when installing or removing a computer component. However, for safety purposes, we do not recommend that you perform these upgrades yourself. If you want to replace or upgrade any of these components, contact your dealer or a qualified service technician for assistance. English EnglishEnglish 12 3 Upgrading your computer To remove a memory DIMM Note: The memory DIMM has only one notch located toward the center of the module. 1 Remove the side panel. 2 Locate the memory DIMM socket on the mainboard. 3 Press the holding clips on both sides of the memory DIMM socket outward to release the memory DIMM (a). Gently pull the memory DIMM out of the socket (b). To install a memory DIMM 1 Locate the memory DIMM socket on the mainboard. Align the memory DIMM with the socket (a). Press the memory DIMM into the socket until the clips lock onto the memory DIMM (b). Note: The memory DIMM sockets are slotted to ensure proper installation. If you insert a memory DIMM but it does not fit easily into the socket, turn the memory DIMM around and try to insert it again. To reconfigure your computer Your computer automatically detects the amount of memory installed. Run the BIOS utility to view the new value for total system memory and make a note of it. Replacing the hard disk Follow these steps to replace your computer's hard disk: 1 Remove the computer cover. 2 Detach all cables connected to the hard disk and pull the hard disk out. 3 Remove the drive rails that hold the hard disk to the disk frame and detach the hard disk. Set the drive rails aside. 4 Insert the new hard disk into the frame and secure it with drive rails. 5 Reattach all cables to the new hard disk. English Note: Make sure that the other ends of the disk cables are securely connected to their corresponding connectors on the mainboard. EnglishEnglish 14 3 Upgrading your computer 6 Reinstall the metal bracket frame to the housing. 7 Replace the computer cover. Installing an expansion card To install an expansion card: 1 Remove the computer cover. 2 Locate an empty PCI Express or PCI slot on the mainboard. 3 Remove the bracket lock that holds the bracket to the computer. Save the lock. 4 Pull out the bracket on the housing opp...
Эта инструкция также подходит к моделям:Компьютеры - Veriton L6610G (253.4 kb)
Компьютеры - Veriton M258 (253.4 kb)
Компьютеры - Veriton M280 (253.4 kb)
Компьютеры - Veriton M288 (253.4 kb)