Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Intel Desktop Board DH57JG supports the Intel Core i5-600 series, Intel Core i3, and Intel Pentium processors in an LGA1156 socket. Processors are not included with the Desktop Board and must be purchased separately. The processor connects to the Desktop Board through the LGA1156 socket. For information on supported processors for Intel Desktop Board DH57JG, go to Desktop Board Features Intel® H57 Express Chipset The Intel H57 Express Chipset, consisting of the Intel H57 Platform Controller Hub (PCH), provides interfaces to the processor and the USB, SATA, LPC, audio, network, display, and PCI Express x1 interfaces. The Intel H57 PCH is a centralized controller for the board’s I/O paths. Main Memory NOTE To be fully compliant with all applicable Intel ® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation. The board has two DIMM sockets and supports the following memory features: • Two independent memory channels with interleaved mode support • Support for non-ECC, unbuffered, single-sided or double-sided DIMMs with x8 organization and single-sided DIMMs with x16 organization • 8 GB maximum total system memory (with 2 Gb memory technology) • Minimum total system memory: 512 MB using a 1 Gb x16 module • Serial Presence Detect • DDR3 1333 MHz and DDR3 1066 MHz SDRAM DIMMs NOTE 32-bit operating systems are limited to a maximum of 4 GB of memory. These operating systems will report less than 4 GB because of the memory used by add-in graphics cards and other system resources. Intel Desktop Board DH57JG Product Guide Graphics Subsystem The board supports system graphics through either Intel HD Graphics or a PCI Express 2.0 x16 add-in graphics card. Integrated Graphics The board supports integrated graphics through the Intel® Flexible Display Interface (FDI) for processors with Intel HD Graphics. Intel® HD Graphics The Intel HD Graphics controller features the following: • 3D Features . DirectX10* and OpenGL* 2.1 compliant . Shader Model 4.0 • Video . Hi-Definition content at up to 1080p resolution . Hardware accelerated MPEG-2, VC-1/WMV, and H.264/AVC High-Definition video formats . Intel® Clear Video HD Technology with advanced video processing • Dynamic Video Memory Technology (DVMT) 5.0 support including support of up to 1.7 GB Video Memory with a 4 GB and above system memory configuration High-Definition Multimedia Interface* (HDMI*) The HDMI port supports standard, enhanced, or high-definition video, plus multichannel digital audio on a single cable. It is compatible with all ATSC and DVB HDTV standards and supports eight full range channels at 24-bit/96-kHz audio of lossless audio formats such Dolby* TrueHD or DTS* HD Master Audio. The maximum supported resolution is 1920 x 1200 at 60 Hz refresh (WUXGA). The HDMI port is compliant with the HDMI 1.3 specification. The HDMI port is enabled for the POST whenever a monitor is attached, regardless of the DVI-I connector status. Depending on the type of add-in card installed in the PCI Express x16 connector, the HDMI port will behave as described in Table 3. Table 3. HDMI Port Status Conditions PCI Express x16 Connector Status HDMI Port Status No add-in card installed Enabled Non-video PCI Express x1, x4, or x8 add-in card installed Enabled PCI Express x4, x8, or x16 graphics add-in card installed Disabled Desktop Board Features Digital Visual Interface (DVI-I) The DVI-I port supports both digital and analog DVI displays. The maximum supported resolution is 1900 x 1200 (WUXGA). The DVI port is compliant with the DVI 1.0 specification. The DVI analog output can be converted to VGA using a DVIVGA converter. Depending on the type of add-in card installed in the PCI Express x16 connector, the DVI port will behave as described in Table 4. Table 4. DVI Port Status Conditions PCI Express x16 Connector Status DVI Digital (DVI-D) Port Status DVI Analog (DVI-A) Port Status(Note) No add-in card installed Enabled Enabled Non-video PCI Express x1, x4, or x8 add-in card installed Enabled Enabled PCI Express x4, x8, or x16 graphics add-in card installed Disabled Disabled Note: DVI analog output can be converted to VGA with a DVI-VGA converter. VGA Displays The DVI-I port supports VGA displays when a DVI-I to VGA converter is used. The maximum supported resolution is 2048 x 1536 (QXGA). The DVI-A port is enabled for the POST whenever a monitor is attached, regardless of the HDMI connector status. PCI Express* x16 Graphics The Intel Core i5-600 series, Intel Core i3, and Intel Pentium processors in an LGA1156 socket support discrete add-in graphics cards via the PCI Express 2.0 x16 add-in card connector. The board supports the following PCI Express speeds: • PCI Express 2 frequency ...