Configuring the BIOS Super IO Configuration The items in this menu allow you to configure NCT5577D Super IO Chipset. q PS2 Keyboard/Mouse Swap Allows you to set PS2 Keyboard/Mouse swap. The default value is [Keyboard]. q Serial Port 0 Configuration Allows you to set parameters of Serial Port 0 (C0MA). ACPI Settings The items in this menu allow you to set ACPI Configuration. q ACPI Sleep State Select the highest ACPI sleep state, the system will enter when the SUSPEND button is pressed. q Restore on AC Power Loss This item allows you to configure how the system board responds to a power failure. q Deep Sleep When enabled, wake up from S4/S5 can only be done by power button. q Wake system with Fixed Time Use this item to enable or disable wake system with fixed time. Chipset Menu The chipset menu items allow you to change the advanced chipset settings. Press to display the sub-menu: Display Configuration The item allows you to configure north bridge features, including Memory, Graphics, and so on. OnBoard Device Config The item allows you to configure onboard device features, including LAN, HDA, and so on. Intel Desktop Board DH61KVCH Boot Menu The Boot menu items allow you to change the system boot options. Press to display the configuration options: Boot Settings Configuration The items allow you to configure Boot settings. Press To display the configuration options: q Setup Prompt Timeout Use this item to set number of seconds to wait for setup activation key. q Bootup NumLock State Use this item to select the keyboard NumLock state: [On] or [Off]. q Quiet Boot When set to [Disabled], displays normal POST message. When set to [Enabled], displays OEM Logo instead of POST messages. q Fast Boot Enable or disable boot with initialization of a minimal set of devices required to launch active boot option. q GateA20 Active When set to [Upon Request], GA20 can be disabled using BIOS services. When set to [Always], GA20 can not be disabled; this option is useful when any RT code is executed above 1MB. q Option ROM Messages Use this item to set display mode for Option. q Interrupt 19 Capture When set to [Enabled], this function allows the option ROMS to trap interrupt 19. Configuring the BIOS Security Menu The security menu items allow you to change the system security settings. Press to display the configuration options: Administrator Password Select this item to set Setup Administrator Password. User Password Select this item to set the user password. To set an Administrator/User Password: 1. Select the item [Administrator/User Password] and press . 2. From the password box, type a password composed of at least six letters and/or numbers, then press . 3. Confirm the password when prompted: The message “Password Installed” appears after you successfully set your password. To change the administrator/user password, follow the same steps as setting a use password. To clear the administrator/user password, select the item [Administrator/User password], then press . The message “Password Uninstalled” appears. Intel Desktop Board DH61KVCH Exit Menu The exit menu items allow you to load the option or failsafe default values for the BIOS items, and save or discard your changes to the BIOS items. Press to display the sub-menu: Save Changes and Exit Select this item and press to save the changes that you have made in the BIOS Setup and exit the BIOS Setup. When the diolog box [Save configuration and exit?] appears, select [Yes] to save and exit, or select [No] to return to the main menu. Discard Changes and Exit Select this option only if you do not want to save the changes that you have made to the setup program. If you made changes to fields other than system date, system time, and password, the BIOS asks for a confirmation before exiting. Save Changes and Reset Select this item and press to reset the system after saving the changes. When the diolog box [Save configuration and reset?] appears, select [Yes] to save and reset, or select [No] to return to the main menu. Discard Changes and Reset Select this item and press to reset system setup without saving any changes. When the diolog box [Reset without saving?] appears, select [Yes] to discard and reset, or select [No] to return to the main menu. Save Changes Select this item and press to save the changes that you have made in the BIOS Setup and exit the BIOS Setup. When the diolog box [Save configuration?] appears, select [Yes] to save changes, or select [No] to return to the main menu. Configuring the BIOS Discard Changes This option allows you to discard the selections you have made and restore the previ ously saved values. When the dialog box [Load Previous Values?] appears, select [Yes] to discard any change and load the previously saved values. Restore Defaults Use this item to restore/load default values for all the setup options. Save as User Defaults Use this item to save...
