Оценок - 0, средний балл: 0 ( )

Производитель: Dell Размер: 1.6 mb Название файла: Язык инструкции:

К этому устройству также есть другие инструкции:

Компьютеры - XPS 210 (1.6 mb)

Компьютеры - XPS 210 (1.6 mb)

Компьютеры - XPS 210 (1.6 mb)

Компьютеры - XPS 210 (2.57 mb)

Показать все

Компьютеры - XPS 210 (2.1 mb)

Компьютеры - XPS 210 (1.71 mb)

amber light — Blinking amber indicates a problem with an installed device; solid amber indicates an internal power problem (see "Power Problems" in your computer Owner's Manual). Hard drive access light green Link integrity light (on integrated network adapter) green light — A good connection exists between a 10-Mbps network and the computer. orange light — A good connection exists between a 100-Mbps network and the computer. off (no light) — The computer is not detecting a physical connection to the network. Activity light (on integrated network adapter) yellow blinking light Diagnostic lights four lights on the front panel (see Diagnostic Lights for an explanation of the diagnostic light codes) Standby power light STBYLED on the system board Activity light (optional Media Card Reader) green blinking light Power DC power supply: Wattage 275 W Heat dissipation 935 BTU/hr Voltage (see the safety instructions in the Product Information Guide for important voltage setting information) manual selection power supplies — 90 to 135 V at 50/60 Hz; 180 to 265 V at 50/60 Hz Backup battery 3-V CR2032 lithium coin cell Physical Height 31.8 cm (12.5 inches) Width 9.4 cm (3.7 inches) Depth 36.8 cm (14.5 inches) Weight 6.89 kg (15.2 lb) Environmental Temperature: Operating 10° to 35°C (50° to 95°F) Storage –40° to 65°C (–40° to 149°F) Relative humidity 20% to 80% (noncondensing) Maximum vibration: Operating 0.25 G at 3 to 200 Hz at 0.5 octave/min Storage 0.5 G at 3 to 200 Hz at 1 octave/min Maximum shock: Operating bottom half-sine pulse with a change in velocity of 50.8 cm/sec (20 in/sec) Storage 27-G faired square wave with a velocity change of 508 cm/sec (200 in/sec) Altitude: Operating –15.2 to 3048 m (–50 to 10,000 ft) Storage –15.2 to 10,668 m (–50 to 35,000 ft) Back to Contents Page System Setup Dell™ XPS™ 210 Service Manual Overview Entering System Setup System Setup Options Boot Sequence Clearing Forgotten Passwords Clearing CMOS Settings Flashing the BIOS Overview Use system setup as follows: l To change the system configuration information after you add, change, or remove any hardware in your computer l To set or change a user-selectable option such as the user password l To read the current amount of memory or set the type of hard drive installed Before you use system setup, it is recommended that you write down the system setup screen information for future reference. Entering System Setup 1. Turn on (or restart) your computer. 2. When the blue DELL™ logo appears, press immediately. If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop, then shut down your computer and try again. System Setup Screens The system setup screen displays current or changeable configuration information for your computer. Information on the screen is divided into three areas: the options list, active options field, and key functions. NOTICE: Unless you are an expert computer user, do not change the settings for this program. Certain changes can make your computer work incorrectly. NOTE: Keyboard failure may result when a key on the keyboard is held down for extended periods of time. To avoid possible keyboard failure, press and release in even intervals until the system setup screen appears. Options List — This field appears on the left side of the system setup window. The field is a scrollable list containing features that define the configuration of your computer, including installed hardware, power conservation, and security features. Scroll up and down the list with the up- and down-arrow keys. As an option is highlighted, the Option Field displays more information about that option and the option's current and available settings. Press to expand or contract each of the main option fields. Option Field — This field contains information about each option. In this field you can view your current settings and make changes to your settings. Use the right- and left-arrow keys to highlight an option. Press to make that selection active. Key Functions — This field appears below the Option Field and lists keys and their functions within the active system setup field. System Setup Options NOTE: Depending on your computer, BIOS version, and installed devices, the items listed in this section may not appear, or may not appear exactly as listed. System System Info Lists system information such as the computer name, the BIOS version number and date, system tags, and other system-specific information. NOTE: The system name listed in the BIOS may not appear exactly as the name that appears on the computer or in the computer's documentation. CPU Info Identifies whether the computer's processor supports Hyper-Threading and lists the processor bus speed, processor ID, clock speed, and L2 cache. Memory Info Indicates the amount of installed memory, memory speed, channel mode (dual or single), and type of memory. Date/Time Displays current date and time s...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: