Оценок - 0, средний балл: 0 ( )

Производитель: Dell Размер: 2.82 mb Название файла: Язык инструкции:

К этому устройству также есть другие инструкции:

Компьютеры - Vostro 220s (3.06 mb)

Компьютеры - Vostro 220s (2.84 mb)

Компьютеры - Vostro 220s (2.84 mb)

Date (mm:dd:yy) SATA Info Displays the SATA drives integrated in the system (SATA -0; SATA-1; SATA-2; SATA-3; SATA-4; SATA-5). SATA Mode AHCI by default Halt On All Error; All; But Keyboard. (All, But Keyboard by default) Advanced BIOS Features CPU Feature SpeedStep—Enabled; Disabled (Enabled by default) Execute Disable Bit—Enabled; Disabled (Enabled by default) Hyper-Threading—Enabled; Disabled (Enabled by default) Core Multi-Processing—Enabled; Disabled (Enabled by default) Intel(R) C-STATE tech—Enabled; Disabled (Enabled by default) BSotaottu Usp NumLock Off; On (On by default) Quiet Boot Enabled; Disabled (Enabled by default) Boot Configuration HParirdor Diitsyk Boot Used to set the device priority of hard drives. The items displayed are dynamically updated according to the hard drives detected. BReomootv Parbiloer Dirtiyves Used to set the device priority of removable devices such a media card readers. The items displayed are dynamically updated according to the removable devices connected. First Boot Device Removable; Hard Disk; CDROM; USB-CDROM; Legacy LAN; Disabled (Removable by default) DSeecviocnde Boot Removable; Hard Disk; CDROM; USB-CDROM; Legacy LAN; Disabled (Hard disk by default) Third Boot Device Removable; Hard Disk; CDROM; USB-CDROM; Legacy LAN; Disabled (CD-ROM by default) BSeocotur Mietnyu Enabled; Disabled (Disabled by default) Advanced Chipset Features FIinirstt Display Onboard, PCI, PCI-Express (PCI-Express by default) Integrated Peripherals USB Controller Enabled or Disabled (Enabled by default) COnobnnoaecrdto rAudio Enabled or Disabled (Enabled by default) Onboard LAN Connector Enabled or Disabled (Enabled by default) OROnMboard LAN Boot Enabled or Disabled (Disabled by default) Serial Port OFF, COM 1, AUTO, COM 3 (AUTO by default) Power Management Setup ACPI Suspend Type S1(POS); S3(STR) (S3(STR) by default) AC Recovery Power Off, Power On, Last State (Power Off by default) Remote Wake Up Enabled; Disabled (Enabled by default) Auto Power On Enabled; Disabled (Disabled by default) Auto Power On Date 0 Auto Power On Time 0:00:00 Load Defaults Load Optimal Defaults Resets CMOS defaults to factory install values. Boot Sequence This feature allows you to change the boot sequence for devices. Option Settings Diskette Drive — The computer attempts to boot from a floppy drive (if installed). If the floppy disk in the drive is not bootable, if no floppy disk is in the drive, or if there is no floppy drive installed in the computer, the computer generates an error message. Hard Drive — The computer attempts to boot from the primary hard drive. If no operating system is on the drive, the computer generates an error message. CD Drive — The computer attempts to boot from the CD drive. If no CD is in the drive, or if the CD has no operating system, the computer generates an error message. USB Flash Device — Insert the memory device into a USB port and restart the computer. When F12 = Boot Menu appears in the upper-right corner of the screen, press . The BIOS detects the device and adds the USB flash option to the boot menu. NOTE: To boot to a USB device, the device must be bootable. To make sure that your device is bootable, check the device documentation. Changing Boot Sequence for the Current Boot You can use this feature, for example, to tell the computer to boot from the CD drive so that you can run the Dell Diagnostics on the Dell Drivers and Utilities disc, but you want the computer to boot from the hard drive when the diagnostic tests are complete. You can also use this feature to restart your computer to a USB device such as a floppy drive, memory key, or CDRW drive. 1. If you are booting to a USB device, connect the USB device to a USB connector. 2. Turn on (or restart) your computer. 3. When F2 = Setup, F12 = Boot Menu appears in the upper-right corner of the screen, press . If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop. Then shut down your computer and try again. The Boot Device Menu appears, listing all available boot devices. Each device has a number next to it. 4. At the bottom of the menu, enter the number of the device that is to be used for the current boot only. For example, if you are booting to a USB memory key, highlight USB Flash Device and press . NOTE: To boot to a USB device, the device must be bootable. To make sure your device is bootable, check the device documentation. Changing Boot Sequence for Future Boots 1. Enter the system setup program (see Entering the System Setup Program). 2. Use the arrow keys to highlight the Boot Sequence menu option and press to access the menu. NOTE: Write down your current boot sequence in case you want to restore it. 3. Press the up- and down-arrow keys to move through the list of devices. 4. Press the spacebar to enable or disable a device (enabled devices have a checkmark). 5. Press plus (+) or minus (–) to move a selected device up...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: