|
Инструкция по эксплуатации Dell, модель Vostro 430
Производитель: Dell
Размер: 4.82 mb
Название файла:
Язык инструкции:
|
 
|
|
|
Перейти к скачиванию
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Information in this document is subject to change without notice. © 2010 Dell Inc. All rights reserved. Reproduction of this material in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. July 2010 Rev. A01 Working on Your Computer Removing and Replacing Parts System-Board Layout Specifications System Setup Passwords Diagnostics NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Trademarks used in this text: Dell, the DELL logo, and Vostro are trademarks of Dell Inc.; ATI Radeon is a trademark of Advanced Micro Devices, Inc; Intel and Core are either trademarks or registered trademarks of Intel Corporation; Blu-ray Disc is a trademark of the Blu-ray Disc Association; Microsoft, Windows, Windows Vista, and the Windows Vista start button are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Back to Contents Page System Setup Dell™ Vostro™ 430 Service Manual Overview Entering System Setup System Setup Options Boot Menu Overview Use System Setup as follows: l To change the system configuration information after you add, change, or remove any hardware in your computer l To set or change a user-selectable option such as the user password l To read the current amount of memory or set the type of hard drive installed Before you use System Setup, it is recommended that you write down the System Setup screen information for future reference. Entering System Setup 1. Turn on (or restart) your computer. 2. When the blue DELL™ logo is displayed, you must watch for the F2 prompt to appear. 3. Once this F2 prompt appears, press immediately. 4. If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop. Then, shut down your computer and try again. System Setup Options CAUTION: Unless you are an expert computer user, do not change the settings for this program. Certain changes can make your computer work incorrectly. NOTE: The F2 prompt indicates that the keyboard has initialized. This prompt can appear very quickly, so you must watch for it to display, and then press . If you press before you are prompted, this keystroke will be lost. NOTE: Depending on your computer and installed devices, the items listed in this section may not be present or may not appear exactly as listed. System Information System Info Displays the computer model name. BIOS Info Display the BIOS revision. Service Tag Displays the computer service tag. Asset Tag Displays the asset tag. Processor Type Displays the type of processor. Processor Speed Displays the speed of the processor. Processor L2 cache Displays the processor L2 cache size. Memory Installed Displays the total memory size. Memory Available Displays the memory available in the system. Memory Speed Displays the memory speed. Memory Channel Mode Displays the memory channel modes. . Single . Dual Memory Technology Displays the type of memory used in the computer. Standard CMOS Features System Time Sets the time on your computer. System Date Sets the date on your computer. SATA-0–SATA-3 Displays the auto-detection status of SATA devices. SATA Mode (Default: AHCI) Determines the integrated SATA controller's operating mode. l AHCI l ATA l RAID Halt On (Default: All, But Keyboard) Selects the power-on-self-test (POST) errors at which the computer must stop. l All Errors l All, But Keyboard Advanced BIOS Configuration CPU Information Enables or disables the following features: l Intel® Virtualization Technology (VT) l Intel Hyper-threading l Intel SpeedStep™ l Execute Disable Bit l Intel Turbo Mode l Intel C-State tech The default setting is Enabled. Quick Boot (Default: Enabled) Enables or disables the normal POST messages. Boot Up Num-Lock (Default: Enabled) When Enabled, the key automatically turns on when the computer boots. Hard Disk Protection (Default: Enabled) Enables or disables hard drive protection. Boot Device Configuration Hard Disk Boot Priority Sets the hard drive boot priority. The items displayed are dynamically updated according to the hard drives detected. CD/DVD Drives Sets the boot priority among the attached removable devices. 1st Boot Device through 3rd Boot Device Sets the boot device sequence. Only the bootable devices that are connected to the computer are listed as options. Boot Menu Security (Default: Enabled) Password protects the Boot Menu if a supervisor password is set. Advanced Chipset Features Initiate Graphi...
Напишите ваш отзыв об устройстве
|
|
