Enter if you have no more to configure. What is the name of the ISV Group? isvg2 Each ISV group has a unique name. Services configured under this name are associated with a given physical site. Do you want to associate Services with isvg2? y A Service is a combination of the virtual IP address and port on which this Service is provided. To configure a Service, type ONE virtual IP address and port separated by a colon. For example, 10.1.2.7:4455. Enter if you want to associate Services. Enter if you do not want to associate Services. HP Multi-Site Traffic Director Server Appliance SA9200 Getting Started Guide Enter a service to associate with lb2? 10.100.68.5:80 A Service is a combination of the virtual IP address and port on which this Service is provided. To configure a Service, type ONE virtual IP address and port separated by a colon. For example, 10.1.2.7:4455. Type a single Service and press to configure a Service. Press without an entry, when there are no more to configure. What probe method would you like to use for this Service? 3 Services configured under ISV groups can be probed using ping, TCP or HTTP protocols. The default choice is TCP. Enter <1> for ping Enter <2> for TCP Enter <3> for HTTP What is the URL path? /usr/home/index.html Type the path of the URL you want to probe. Normally a URL is entered as Type ONLY the file path portion of the URL at the Service address and port defined above. For example, /usr/ home/index.html. Enter another Service to associate with lb2? Enter a single Service and press to configure a Service. Press without a Service entry, when you have no more Services to configure. Do you want to configure another ISV group in ns1.xyzex. com? n Enter if you want to configure another ISV group. Enter if you have no more to configure. Do you want to configure another peer HP_SA9200? n A peer HP_SA9200 participates in FLASH load balancing and can be authoritative for different distributed sites configured in this HP SA9200. If you have more than one HP_SA9200, please have their fully qualified hostnames and IP addresses available. Enter if you want to configure another peer HP SA9200. Enter if you have no more peers to configure. Automatic Configuration of the SA9200 Hostname is the hostname associated with each VIP. When you have finished the Quick Start Wizard, NTP needs to be configured if you selected Flash as the load balancing method. Type settime at the Boot Monitor prompt or config sys ntp create at the CLI prompt. Do you want to configure a hostname? y A hostname is the name of a distributed site that is serviced by this HP_SA9200. Enter if you want to configure a hostname. Enter if you have no more hostnames to configure. Enter the hostname you want to configure: host1.ns1.xyz-ex.com Hostname is the fully qualified name of the Distributed Site. For example, If you have an alias for this site, you should enter the alias name. For example, if is the alias name of please enter instead of Choose the load balancing method for: 1. Weighted Random 2. Weighted Round Robin 3. CPU Utilization 4. Average Response Time 5. Least Number of Connections 6. Flash Enter Choice 1 - 6: 3 Do you want to map any Services with host1? y Each service that you associated with configured HP Traffic Director(s) and any ISV group(s) is displayed for you to map with this hostname. Choose only the services that you want to map with this hostname. Enter if you want to map any Services. Enter if you do not want to map any Services. Do you want to map Service 10.54.67.5:80? y Enter if you want to map this Service. Enter if you do not want to map this Service. You are currently mapping HP Traffic Director lb1 and Service 10.54.67.5:80 with host1 HP Multi-Site Traffic Director Server Appliance SA9200 Getting Started Guide A factor is a threshold for an agent service.The Factor of Service range is dependent on the Load Balancing method chosen. Do you want to enable Service 10.54.67.5:80? y Enter if you want to enable this Service for this site. Enter if you want place this Service in standby mode for this site. You are currently mapping HP Traffic Director lb1 and Service 10.54.67.5:80 with host1. What is the Factor of Service 10.54.67.5:80? 10 A Service with a higher factor is favored over one with a lower factor. Enter a factor from 1 - 100. You are currently mapping HP Traffic Director lb1 and Service 10.54.67.5:80 with host1 Do you want to map Service 10.54.67.6:80? y Enter if you want to map this Service. Enter if you do not want to map this Service. You are currently mapping HP Traffic Director lb1 and Service 10.54.67.6:80 with host1 Do you want to enable Service 10.54.67.6:80? y Enter if you want to enable this Service for this site. Enter if you want place this Service in ...
Войти: