Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Never wipe the interior of the system with water or dip the system in water. .............................................. Before connecting to any peripheral, please turn off the power of the system. ........................................ Ensure that the voltage select switch is in the correct position for the type of voltage you use (115V/230V). If you are not sure which kind of voltage you are using, please contact your dealer. ............................................................................ ...... July / 2004 WARNING / .... If the battery is not properly handled, there may be a risk of explosion; make sure you are using the same or equivalent battery. Please dispose the used battery according to the instructions given by the manufacturer. .................................................................... ................................ . Please be aware that cracked, deeply scratched or other poor quality disk used in this drive may cause damage to the drive and data in the disk. Such discs may break at high speed rotation. If full care is not exercised in relation to this matter you may void the warranty to this product. .................................................................... .................................................................... .............................. Software & Manual / .................. Power Cord / ...... PC / .... *Mouse (Option) / ............ *Keyboard (Option) / .............. Items included in the package...................... ...... .. Specification with “Option” are subject to change without notice. ..”*”.................................................... Other Product Specifications / ............ - Micro ATX chassis / Micro ATX ........ - Micro ATX main board of GIGABYTE / ...... Micro ATX ...... - Power Supply / .......... - DVD-ROM / CD-ROM / Optical Device Drives / DVD-ROM / CD-ROM /........ - 3.5” 1.44MB FDD / 3.5” 1.44MB ...... - Card Reader (Option) / ................ - Assembly Box Content / .......... .Cable Tie / ...... .Screw bag / ...... I. Chassis / ........ Dimension= 350(D)mm x 195(W)mm x 370(H)mm ........= 350(D)mm x 195(W)mm x 370(H)mm This chassis is made with material complied with UL specification. There are two 5.25” and four 3.5” drive bays. This chassis complies with corresponding EMC and safety regulations. .................. UL ...................... 5.25”...... 3.5”.................... ............................................ II. Motherboard / ...... See Motherboard Manual for details. .......................................................... III. Power Supply / .......... The ATX switching power supply included with this product supports soft off function. Hence, the system can be shut down automatically. Default input voltage setting is 230V. .......... A.T.X .............................................. 230V.. .. Note: Please check the voltage requirements in the country you reside before turning on the PC. Select the correct voltage setting for your local area voltage before the computer system is plug to the power source. ............................................................................ .... 115V.. WARNING: Select incorrect setting will cause the Power supply failure! .............................................. IV. Front and Rear Panel Components / .............. Front & Rear Panel Components / .......... 1. DVD-ROM (Option) / .............. 2. Floppy Disc (Option) / .............. 3. Power Button / ........ 4. AC Inlet / ........ 5. Voltage Switch / ........ I/O Ports / ........ MIC In / ...... COM Port / ...... Line Out (Audio Out or Earphone) / ................) VGA Port / VGA .. Line In (Audio In) / ........ LPT Port / ...... Keyboard Port (PS/2) ......(PS/2.. LAN Port / ...... Mouse Port (PS/2) ........PS/2.. USB Port / USB .. IEEE 1394 / IEEE 1394 .... . . . . . V. Installing the System / ............ 1. Remove the screws of both side covers of the chassis, push backward to dismount the covers. ................................................ 2. Remove 3 screws of the disc drive chassis and dismount chassis. .................. 3 .......................... 3. Memory / ...... There are fixing grooves on both sides / .............. DDR Make sure the direction of the foolproof groove must be the same as that of the memory slot on the motherboard. The hooks must be fixed into the grooves before the installation is considered complete. ...................................................................................... ................................ 4. HDD / FDD /ODD Installation / ........../....../.......... 4-1. There are four 3.5” drive bays in the disc drive chassis. The left 2 bays are for FDD, and the right 2 bays are for HDD. Select a place and fix the HDD / FDD with screws. .................. 4 .. 3.5”...................................................... ............................/.......................................... .. .. .. .. .... ...... .... .. .... .... .. ......