Оценок - 0, средний балл: 0 ( )

Производитель: Gigabyte Размер: 820.29 kb Название файла: Язык инструкции:

..• To remove or clean the product, remember to unplug the power cord. ..• Place your system unit in a cool, clean space, to be far away from water, heat and dust. ..• Before connecting any peripheral equipment, please unplug the power cord from the system unit to prevent unexpected damage. ..• The AC input supplies power to the system unit. Check your dealer if you can not recognize the type of the power supply. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacture. Dispose of used batteries according to the manufacturer’s instructions. ..• Introduction TM G-MAX series product, to adopt main board of design & development by GIGABYTE that is Micro ATX mechanical design in advance, let you work smoothly in Windows environment. Micro ATX adopt dexterous mechanical design, so it is ease by assembly & safeguard. Specification Overview Micro ATX chassis Micro ATX main board of GIGABYTE Power supply DVD-ROM / CD-ROM (Option) 1.44 “FDD Multi I/O Card (Option) Keyboard (Option) Assembly Box Content Main board user’s manual User’s manual Main board Driver CD IDE cable Screw bag Mouse (Option) P. E2 G-MAX G-MAX TM Micro ATX Series User’s Manual ..• Items included in the package Software and Manuals Power Cord PC Mouse (Option) Keyboard (Option) Cables P. E3 G-MAX G-MAX TM Micro ATX Series User’s Manual I. Chassis ..Dimension 405(D)mm x 180(W)mm x 352(H)mm This chassis is made with material complied with UL specification and designed for space saving and easy open with thumbscrew. There are two 5.25” and three 3.5” drive bays. This chassis complies with corresponding EMC and safety regulations. II. Motherboard See Motherboard Manual for details. III. Power Supply The ATX switching power supply included with this product supports soft off function. . Hence, the system can be shut down automatically under Microsoft Windows 98 (or higher versions) commands. Default input voltage setting is 230V. .. Note: Please check the voltage requirements in the country you reside before turning on the PC. IV. System Component Installation ..Remove the screws of the side cover of the chassis, push backward to dismount the cover. Remove front panel For different processor types, please refer to below installation guide. .... ..CPU (For Intel Pentium..and Intel Celeron processors) CPU Pin Lever P. E4 TM G-MAX Micro ATX Series User’s Manual 1. Insert the CPU on the CPU socket. Before installation, lift up the lever and align the cut of the CPU with the marking on the socket. 2. Pull down the lever to lock the CPU on the socket after installation. When you are installing the heat sink, please make sure to keep the heat sink tight against the CPU to obtain the best cooling result. 3. Apply the thermal compound to one side of the template, and ensure the compound is spread evenly across the template and repeat if necessary. 4. Connect fan power connector to the CPU FAN connector on the motherboard. Click heat sink lock on the CPU socket Install fan on top of CPU . . ..CPU(For IntelPentium4 processors) CPU Pin Lever 1.Insert the CPU on the CPU socket. Before installation, lift up the lever and align the cut of the CPU with the marking on the socket. 2.Pull down the lever to lock the CPU on the socket after installation. Put CPU cooler on retention module and make sure to keep the heat sink tight against the CPU to obtain the best cooling result. Lock the cooler on retention module. 3. Apply the thermal compound to one side of the template, and ensure the compound is spread evenly across the template and repeat if necessary. 4. Connect fan power connector to the CPU FAN connector on the motherboard. Click the heat sink locker to the motherboard retention module. Install fan on top of CPU P. E5 Install fan on top of CPU Install fan on top of CPU TM G-MAX Micro ATX Series User’s Manual . ..CPU (For Intel Tualatin processors) In this section you will find the gist of CPU installation. CPU Pin Lever 1.Insert the CPU on the CPU socket. Before installation, lift up the lever and align the cut of the CPU with the marking on the socket. 2.Pull down the lever to lock the CPU on the socket after installation. Put CPU cooler on retention module and make sure to keep the heat sink tight against the CPU to obtain the best cooling result. Lock the cooler on retention module. 3. Apply the thermal compound to one side of the template, and ensure the compound is spread evenly across the template and repeat if necessary. 4. Connect fan power connector to the CPU FAN connector on the motherboard. Click fan lock on the pin at sides of CPU socket. Set CPU clock frequency from BIOS Setup, see Motherboard Manual for details. For AMD AthlonTM and AMD DuronTM processors, the installation method will be similar .. .. to IntelPentium..and Intel Celeron processors P. E6 G-MAX G-MAX TM Micro ATX Series User’s Manual ..Memory Notches at sides of module SDRAM Position notches. Make sure ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: