Оценок - 1, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Adjust the brightness level of the display as well. ! While adjusting the viewing angle, do not exert excessive pressure on your computer to eliminate a risk of mechanical damage. . Lighting – Choose a location where windows and lights do not cause glare and reflection on the display. Use indirect lighting to avoid bright spots on the display. Proper lighting adds to your comfort and work efficiency. . Ventilation – Make sure you leave at least 10 cm of space behind and at least 20 cm of space on each side of the main unit. Getting Started > n 10 N Getting Started This section describes how to get started using your VAIO computer. . Locating Controls and Ports (page 11) . About the Indicator Lights (page 15) . Setting Up Your Computer (page 16) . Shutting Down Your Computer Safely (page 18) . Using the Power Saving Mode (page 19) . Keeping Your Computer in Optimum Condition (page 21) Getting Started > Locating Controls and Ports n 11 N Locating Controls and Ports Take a moment to identify the controls and ports shown on the following pages. ! The appearance of your computer may be different from those illustrated in this manual due to variations in specifications. Front A Built-in microphone (monaural) B Built-in MOTION EYE camera indicator (page 15) C Built-in MOTION EYE camera (page 39) D HDMI/VIDEO input indicator* (page 15) E WIRELESS indicator (page 15) F Disc drive indicator (page 15) G Power indicator (page 15) H Built-in speakers (stereo) I LCD screen/touch screen (page 35) ! Due to the mechanical design of the touch screen of your computer, some areas of the screen surface may become warm while you are using the computer for an extended period of time. This is normal and does not indicate a malfunction. J Bottom chassis frame (page 108) K Remote sensor* Point the supplied remote commander to this sensor for operations. * On selected models only. Getting Started > Locating Controls and Ports n 12 N Back ! The area around the air exhaust vent (3) becomes extremely hot while your computer is on. Be sure to wait until the computer cools down before you touch it. A Power button B DISPLAY OFF button/DISPLAY OFF indicator (page 15) Press this button to turn off the LCD backlight. While the HDMI input or the video input is selected as the audio/video input source by the INPUT SELECT button (page 13), pressing this button also turns off the volume. C Air exhaust vent D Memory module compartment cover (page 101) E VIDEO INPUT jacks*1 (page 51) F HDMI INPUT port*1 (page 51) G AC input port (page 16) H Prop-up stand (page 108) I VHF/UHF input port*1 (page 48) J Network (LAN) port (page 72) K OPTICAL OUT port (page 84) (Output Sampling Rate: 44.1 KHz/48.0 KHz/96.0 KHz) L USB ports*2 (page 86) M CONNECT button (page 29), (page 33) *1 On selected models only. *2 Compliant with the USB 2.0 standard and support high-/full-/low- speeds. Getting Started > Locating Controls and Ports n 13 N Right A Optical disc drive (page 40) B Manual eject hole (page 139) C Drive eject button (page 40) D INPUT SELECT button* (page 53)/ INPUT SELECT indicator* (page 15) E MENU button* (page 53) F V/v (Up/Down) buttons* (page 53) G OK button* (page 53) * On selected models only. Getting Started > Locating Controls and Ports n 14 N Left A "Memory Stick Duo" slot*1 (page 60) B Media Access indicator (page 15) C SD memory card slot (page 67) D i.LINK 4-pin (S400) port (page 88) E USB ports*2 (page 86) F Headphones jack (page 84) G Microphone jack (page 85) H Line In jack Connect an external audio device to receive audio signals. *1 Your computer supports only Duo-size "Memory Stick". *2 Compliant with the USB 2.0 standard and support high-/full-/low- speeds. Getting Started > About the Indicator Lights n 15 N About the Indicator Lights Your computer is equipped with the following indicator lights: Indicator Functions Power 1 Illuminates in green while the computer is on, illuminates in orange while the computer is in Sleep mode, and turns off when the computer is turned off. HDMI/VIDEO input* Illuminates in green while the HDMI input or the video input is selected as the audio/video input source. Built-in MOTION EYE camera Illuminates while the built-in camera is in use. Media Access Illuminates while data access to a memory card, such as "Memory Stick" and an SD memory card, is in progress. (Do not place the computer into Sleep mode or turn it off while this indicator light is lit.) When the indicator light is unlit, the memory card is not in use. INPUT SELECT* Illuminates in green while the HDMI input or the video input is selected as the audio/video input source. DISPLAY OFF Illuminates in orange while the LCD backlight is off. Disc drive Illuminates while data access to the built-in storage device or the optical disc drive is in progress. Do not place the computer into Sleep mode or turn it off while this indicator light is lit. WIRELESS Illuminates while one or more wireless options are enabled. * On selected models only. Getting St...
Эта инструкция также подходит к моделям:Компьютеры - VPCL13J9E_S (2.2 mb)
Компьютеры - VPCL13M1E_S (2.2 mb)
Компьютеры - VPCL13S1E_S (2.2 mb)
Компьютеры - VPCL13S1R_B (2.2 mb)