Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Компьютеры - C20 Workstation (ThinkStation) (237.37 kb)
Фрагмент инструкции
3. Windows 10 Installation Using AVAGO Controllers
Windows 10 Retail Installation Using AVAGO Controllers
Note: Drive capacity greater than 2TB must be installed in UEFI/GPT mode. Legacy/MBR installation limits
drive capacity to 2TB or less.
Note: The AVAGO controller requires the use of a RAID or JBOD being set up prior to starting the installation.
Please refer to the “P500-P700-P900 How to Create and Configure RAID Arrays” document for details on how
to set up a RAID device.
1. As the system is booting through the Lenovo BIOS POST screens, press the F12 key for the BIOS startup
menu option. Once the startup menu appears, choose one of the two options below
a. Select the ‘UEFI’ option for the device containing the installation media to install the OS to a GPT
partition.
b. Select the ‘Legacy’ option for the device containing the installation media to install the OS to a MBR
partition.
2. The system should then boot the Windows 10 image installation media.
Note: Enter a keystroke on the keyboard to initialize media if/when prompted.
...Эта инструкция также подходит к моделям:
Компьютеры - C20x Workstation (ThinkStation) (935.99 kb)
Компьютеры - C30 Workstation (ThinkStation) (935.99 kb)
Компьютеры - D10 Workstation (ThinkStation) (935.99 kb)
Компьютеры - D20 Workstation (ThinkStation) (935.99 kb)