The information in this update applies to you whether your manual is the Apple TV/Video System User’s Guide or the Apple Video System User’s Guide. What you should have In addition to the items shown in your manual in the section “What You Should Have,” in Chapter 1, look for the metal grounding clip for the video input card (as shown below). Grounding clip Note: The grounding clip may be attached to the video input card, or it may be a separate piece in your package. Installing the video input

Failure to follow these instructions could result in damage to your equipment and may void your warranty. Replacing the battery requires five basic steps: • Turn off the computer. • Remove the computer core from the enclosure. • Remove the installed battery. • Install the replacement battery. • Replace the computer core in the enclosure. Note: A video version of the replacement instructions is available at Tools Required No tools are required for this procedure. Electrostatic Discharge (ESD) Sta

Failure to follow these instructions could damage your equipment and void its warranty. Note: Written and video instructions covering customer-installable parts are available at Warning: During this procedure, keep small parts away from children. Tools Required The only tool required for this procedure is a Phillips screwdriver. Opening the Computer Warning: Always turn off your computer before opening it to avoid damaging its internal components. 1. Place your computer on a clean, flat s

Failure to follow these instructions could result in damage to your equipment and may void your warranty. Note: Written and video instructions covering customer-installable parts are available at Tools Required • Phillips screwdriver • Pliers Opening the Computer Warning: Always turn off your computer before opening it to avoid damaging its internal components. 1. Place your computer on a clean, flat surface. 2. If you think your computer is in sleep, press the power button on the front of the c

Failure to follow these instructions could damage your equipment and void its warranty. Note: Written and video instructions covering customer-installable parts are available at Warning: During this procedure, keep small parts away from chlldren. Tools Required The only tool required for this procedure is a Phillips screwdriver. Opening the Computer Warning: Always shut down your computer before opening it to avoid damaging its internal components or causing injury. After you shut down the compu

Failure to follow these instructions could damage your equipment and void its warranty. Note: Written and video instructions covering customer-installable parts are available at Warning: During this procedure, keep small parts away from children. Tools Required The only tool required for this procedure is a small flat-blade screwdriver. Preliminary Steps Warning: Always shut down your computer before opening it to avoid damaging its internal components or causing injury. After you shut dow

Warning: Do not use PCI cards that function only at 66 MHz in the PCI slots. Damage to the equipment could result. If you are installing an additional 66 MHz PCI card, rather than replacing an existing PCI card like-for-like, check with the card’s manufacturer to see if the new 66 MHz card also works at 33 MHz. Note: The illustrations in the following procedure show how to replace an AGP video card. The replacement procedure for a PCI card is similar. However, remember that only AGP cards can be

Failure to follow these instructions could damage your equipment and void its warranty. Tools Required The only tool required for this procedure is a Phillips #1 screwdriver. Opening the Computer 1. Shut down the computer. Warning: Always shut down the computer before opening it to avoid damaging its internal components or the components you are installing. Do not open the computer or attempt to install items inside it while it is on. 2. Wait 5 to 10 minutes to allow the computer's interna

Note: Online instructions covering customer-installable parts are available at Tools Required No tools are required for this procedure.You may, however, find a Phillips screwdriver useful in releasing the thumbscrews at the front of the server. Opening the Server The server slides open from the front of the rack. The top cover remains in place in the rack while the bottom housing (containing all internal components) should be placed on a sturdy, flat surface. 1. Alert users that the server will

Failure to follow these instructions could result in damage to your equipment and may void your warranty. Note: Written and video instructions covering customer-installable parts are available at Tools Required No tools are required for this procedure. Opening the Computer Warning: Always turn off your computer before opening it to avoid damaging its internal components. 1. Place your computer on a clean, flat surface. 2. If you think your computer is in sleep, press the power button on t