Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
ASUS AP130 Pedestal Server System Package Contents The following checklist enumerates the components included in the standard system package. 1) ASUS AS11 chassis 2) ASUS P4B-MX motherboard 3) 200W ATX power supply 4) 52X CD-ROM drive 5) 1.44MB floppy disk drive 6) AGP 4X card (optional) 7) Support CD that includes drivers, utilities, and ASUS Server Web-based Management (ASWM) 8) User’s manuals (for system and motherboard) If any of the above items is missing, contact your dealer. Introduction: About This Manual Chapter 1 Chapter 1 This chapter describes the general features of the AP130 server. It includes sections on front panel, rear panel, and internal features of the server. System Overview ASUS AP130 Pedestal Server 1.1 System Features The ASUS AP130 Server is a stylish tower chassis that accommodates the ASUS P4B-MX motherboard. The server is powered by Intel® Pentium® 4 478/Northwood processor, and supports the latest I/O, audio, and video technologies through the chipsets embedded on the motherboard. Following are highlights of the server’s many features. • Processor: Support for Intel Pentium 4 processor with 512KB L2 cache and speeds of up to over 2GHz • Memory: Three DIMM sockets support up to 3GB of system memory using PC133/PC100 DIMMs • System Chipset: Intel 845 (Brookdale) chipset composed of Intel Memory Controller Hub (MCH). The MCH along with the south bridge Intel I/O Controller Hub 2 (ICH2) are interconnected through the Intel proprietary Hub interface. The MCH provides the processor interface, system memory interface, AGP interface, and Hub Interface. • LAN Chipset: Intel 82562ET is a highly integrated Platform LAN Connect (PLC) device that allows 10BASE-T and 100BASE-TX networking capabilities, and provides the LAN solution to perform high-speed data transfers over the PCI bus. • Storage: Four external bays that support two optional 5.25-inch IDE hot-swap drives, one 52X CD-ROM, and 1.44MB floppy drive; internal 3.5-inch drive bays available for two additional IDE drives • Expansion: Three PCI expansion slots, one AGP 4X slot • Power Supply: 200-watt ATX power supply with a 115Vac/230Vac voltage selector switch • Security: Equipped with security chassis keylock Chapter 1: System Overview 1.2 Front Panel Features The AP130 front panel is designed with a door secured by a keylock. When locked, the door prevents unauthorized access to the front panel components. Front USB Ports Front Panel Door Keylock CD-ROM Drive 5.25-inch Drive Bay Floppy Disk Drive Power Switch Power LED HD Access LED Message LED ASUS AP130 Pedestal Server 1.3 Rear Panel Features The AP130 rear panel includes the external I/O ports. The following picture shows the cable connectors and the devices that you connect to the ports. Voltage Selector The switching power supply that came with the server has a voltage selector switch below the power socket. Use this switch to select the appropriate voltage according to the voltage supply in your area. If the voltage supply in your area is 100-127V, set the switch to 115V. If the voltage supply in your area is 200-240V, set the switch to 230V. PS/2 KB USB Serial AC Power PS/2 Mouse Parallel RJ-45 Line Out Line In Mic Game/MIDI VGA 115V/ 230V Voltage Selector Setting the switch to 115V in a 230V environment will seriously damage the server. CAUTION Chapter 1: System Overview 1.4 Internal Features The standard components inside the AP130 server include the motherboard, power supply, floppy and CD-ROM drives, and cables. The picture below shows the standard components of the server. 1 6 2 3 4 5 7 1. Power Supply 2. CD-ROM Drive 3. 5.25-inch Drive Bay 4. Floppy Disk Drive 5. 3.5-inch Internal Drive Bays 6. P4B-MX Motherboard 7. AGP 4X Card (optional) ASUS AP130 Pedestal Server Chapter 1: System Overview Chapter 2 Chapter 2 This chapter describes the hardware setup procedures that you have to perform when installing system components. Hardware Setup ASUS AP130 Pedestal Server 2.1 Remove the Chassis Cover Unlock the side cover Two thumbscrews secure the removable side panel cover. Turn these screws counter-clockwise to release the cover. The screws are attached to the cover. Do pull out the screws. Thumbscrews Remove the side cover Slide the cover for about an inch toward the rear panel then lif it out of the chassis. Chapter 2: Hardware Setup 2.2 Motherboard Placement The motherboard and other internal components of the AP130 server are already installed as indicated in section “1.4 Internal Features”. Refer to the motherboard user’s manual for detailed technical information about the motherboard. NOTE Placement Direction When installing the motherboard, make sure that you place it into the chassis correctly. The edge with the external ports goes to the rear part of the chassis. Place this side towards the rear of the chassis Motherboard Screws Place eight (8) screws in the holes indicated by circles to secure the motherboard to the chassis. Do not overtighten the screws. Doing so...